/* * linux/arch/arm/mach-sa1100/graphicsclient.c * * Author: Nicolas Pitre * * Pieces specific to the GraphicsClient board * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" /* * Handlers for GraphicsClient's external IRQ logic */ #define GRAPHICSCLIENT_N_IRQ (IRQ_GRAPHICSCLIENT_END - IRQ_GRAPHICSCLIENT_START) #define GRAPHICSCLIENT_FIRST_IRQ (IRQ_GRAPHICSCLIENT_CAN - IRQ_GRAPHICSCLIENT_START) static void ADS_IRQ_demux( int irq, void *dev_id, struct pt_regs *regs ) { int i; while( (irq = ADS_INT_ST1 | (ADS_INT_ST2 << 8)) ){ for( i = GRAPHICSCLIENT_FIRST_IRQ; i < GRAPHICSCLIENT_N_IRQ; i++ ) if( irq & (1<mapbase == _Ser1UTCR0) { Ser1SDCR0 |= SDCR0_UART; } else if (port->mapbase == _Ser2UTCR0) { Ser2UTCR4 = Ser2HSCR0 = 0; } return ret; } static u_int graphicsclient_get_mctrl(struct uart_port *port) { u_int result = TIOCM_CD | TIOCM_DSR; if (port->mapbase == _Ser1UTCR0) { if (!(GPLR & GPIO_GPIO14)) result |= TIOCM_CTS; } else if (port->mapbase == _Ser2UTCR0) { if (!(GPLR & GPIO_GPIO16)) result |= TIOCM_CTS; } else if (port->mapbase == _Ser3UTCR0) { if (!(GPLR & GPIO_GPIO18)) result |= TIOCM_CTS; } else { result = TIOCM_CTS; } return result; } static void graphicsclient_set_mctrl(struct uart_port *port, u_int mctrl) { if (port->mapbase == _Ser1UTCR0) { if (mctrl & TIOCM_RTS) GPCR = GPIO_GPIO15; else GPSR = GPIO_GPIO15; } else if (port->mapbase == _Ser2UTCR0) { if (mctrl & TIOCM_RTS) GPCR = GPIO_GPIO17; else GPSR = GPIO_GPIO17; } else if (port->mapbase == _Ser3UTCR0) { if (mctrl & TIOCM_RTS) GPCR = GPIO_GPIO19; else GPSR = GPIO_GPIO19; } } static void graphicsclient_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { // state has ACPI D0-D3 // ACPI D0 : resume from suspend // ACPI D1-D3 : enter to a suspend state if (port->mapbase == _Ser1UTCR0) { if (state) { // disable uart Ser1UTCR3 = 0; } } else if (port->mapbase == _Ser2UTCR0) { if (state) { // disable uart Ser2UTCR3 = 0; Ser2HSCR0 = 0; } } else if (port->mapbase == _Ser3UTCR0) { if (state) { // disable uart Ser3UTCR3 = 0; } } } static struct sa1100_port_fns graphicsclient_port_fns __initdata = { .open = graphicsclient_uart_open, .get_mctrl = graphicsclient_get_mctrl, .set_mctrl = graphicsclient_set_mctrl, .pm = graphicsclient_uart_pm, }; static void __init graphicsclient_map_io(void) { sa1100_map_io(); iotable_init(graphicsclient_io_desc); sa1100_register_uart_fns(&graphicsclient_port_fns); sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); // don't register if you want to use IRDA #ifndef CONFIG_SA1100_FIR sa1100_register_uart(2, 2); #endif /* set GPDR now */ GPDR |= GPIO_GPIO15 | GPIO_GPIO17 | GPIO_GPIO19; GPDR &= ~(GPIO_GPIO14 | GPIO_GPIO16 | GPIO_GPIO18); } MACHINE_START(GRAPHICSCLIENT, "ADS GraphicsClient") BOOT_PARAMS(0xc000003c) BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) MAPIO(graphicsclient_map_io) INITIRQ(graphicsclient_init_irq) MACHINE_END