This release note and the software it accompanies it are copyright (c) 2003, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software.

File name: CL31_drv_212.exe

Driver version 2.12



This download supports Intel(R) SCSI RAID controllers, please verify that this driver has been tested with the RAID card you have chosen to use by checking the drivers web page for your controller at //Support.Intel.Com.


Attention!
===========
This package will extract a copy the Caldera OpenLinux 3.1 RAID driver to a floppy diskette.  Please refer to product and OS documentation for application instructions for this driver.
 


Contents
=========

File			Version 	Size		Date         	Description		
-----			--------     	----- 		-----        	------------
CALD31.EXE				1,230KB		1/10/03		Driver diskette image
README.TXT		n/a	       	2KB	   	2/4/03		This file


Using This Tool
================

Caldera OpenLinux 3.1 (server and workstation)
----------------------------------------------

1. Create the "Modules Override" Disk from Download listed above.
2. Booted from the Install CD and allow the installer to load.
3. At the splash screen, arrow down to "Standard Installation," or "Unattended
	Installation", and press the "e" key.
4. Arrow down to the line that begins with "kernel", and press the "e" key again.
5. At the end of the line starting with "kernel", add the boot parameter 
	"er=modules" and press Enter.
6. Press the "b" key to boot with these new parameters.
7. Continue with the standard installation as outlined in the Caldera OpenLinux 3.1 installation manual.