This release note and the software that accompanies it are copyright (c) 2014, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software. This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation. ====================== Supported SAS Controllers ====================== Intel(R) Integrated RAID Module RMS2LL080 and RMS2LL040 Intel(R) SAS Controller RS25GB008 Intel(R) RAID Controller RS25FB044 Intel(R) Integrated RAID Module RMS25JB040, RMS25JB080, RMS25KB040, RMS25KB080, RMS25LB, and RMS25LB080 Please verify that this utility has been tested with the RAID/SAS card you have chosen to use by checking the drivers web page for your controller at http://www.intel.com/support/. ================= Package Information ================= Driver Version = 19.00.00.00 OS supported = RHEL5 (GA-U9), RHEL6 (GA-U5), SLES10 (GA-SP4), SLES11 (GA-SP1, GA-SP2) (both x86 & x64 versions for these OS versions) This driver is intended for use with IT and IR configurations ==================== Attention! ==================== It is important to follow instructions provided below for successfully installing SLES10/11 or RHEL5/6 operating systems onto SAS device. ================ Known Restrictions ================ N/A ==================== Contents in the package ==================== The following files(or folders) are included in this package: Name Description MPT2SAS_ITIR_RHEL5-6_SLES10-11_ph17_Readme.txt This file License_v2.pdf License file COPYING GNU GENERAL PUBLIC LICENSE mpt2sas-19.00.00.00-src.tar.gz Driver tar archive source mpt2sas-srpms-howto.pdf Instructions on how to create and install the mpt2sas driver binary RPMs from SRPMS /rhel6/rpms-1 x86 and x64 version drivers for RHEL6(GA-U3) including driver RPM source file /rhel6/disks-1 Compact Disk (CD) images for creating Installation CD(s) for RHEL6(GA-U4) /rhel5/rpms-1 x86 and x64 version drivers for RHEL5(GA-U9) including driver RPM source file /rhel5/disks-1 Compact Disk (CD) images for creating Installation CD(s) for RHEL5(GA-U9) /sles10/rpms-1 x86 and x64 version drivers for SLES10(GA-SP4) including driver RPM source file /sles10/disks-1 Compact Disk (CD) images for creating Installation CD(s) for SLES10(GA-SP4) /sles11/rpms-1 x86 and x64 version drivers for SLES11(GA-SP2) including driver RPM source file /sles11/disks-1 Compact Disk (CD) images for creating Installation CD(s) for SLES11(GA-SP2) ========================== binary naming convention. ========================== ------------------------------------------------------------------------------ -KMP (For all SUSE releases) ------------------------------------------------------------------------------ KMP RPM images are named as: lsi-mpt2sas-kmp--_..rpm where: = flavor of distro for which this rpm is built = version tag for this rpm = {sles10, sles11} = x86_64 - Opteron Processor, w/ x86_64 install i686 - i686 or later processor (Red Hat) i586 - x86 installations (SuSE) ppc - Power PC processor example: lsi-mpt2sas-kmp-debug-19.00.01.00_sles11-1.i586.rpm ------------------------------------------------------------------------------ Driver Update Disks: ------------------------------------------------------------------------------ dud images are named : mpt2sas---..dd.gz where: = version tag for this rpm = release tag for this rpm = {sles10, sles11} = x86_64 - Opteron Processor, w/ x86_64 install i686 - i686 or later processor (Red Hat) i586 - x86 installations (SuSE) ppc - Power PC processor example: mpt2sas-19.00.00.00-1-sles11.x86_64.iso.gz ================ Driver Installation Instructions ================ This updated driver can be applied using the normal OS installation options. 1 The purpose of this document is to provide clear instructions on how to install OS on drives attached to the Intel(R) IT controller or device. 2 Prepare Installation disk(s) 2.1 Driver files are available on the CD that shipped with the product or can be downloaded from http://www.intel.com/support/ 2.2 Create install CD(s) from image in disks folder The driver is provided as CD image (file extension is .iso). To prepare the installation driver CD, a third-party cd burner application to burn image to a CD. 3 Installation methods There are different types of installation possible with the installation package provided. Those are explained in different sections. 3.1 OS installation on IT/IR This mode of installation is selected when user needs to install the Operating system on a fresh IT/IR configuration. For this kind of installation the driver update CD is used at the starting of the installation and the installer will update the system with driver images for the required kernels. Follow the procedure given below to install the driver at the time of Installation. ----------------- 3.1.1 Installing RHEL5/6 ----------------- a) Boot to CD-ROM or DVD-ROM with OS Disk 1. b) At the Linux installation prompt type: linux dd c) Press at the boot prompt on the Welcome screen. d) Insert cd made with iso image from step 2.2 e) Select Yes. f) Scroll down to select the Intel RAID adapter driver. g) The utility locates and loads the driver for your device. h) Follow the Red Hat Linux installation procedure to complete the installation. i) Reboot the system. ----------------- 3.1.2 Installing SLES10/11 ----------------- a) Boot to CD-ROM or DVD-ROM with OS Disk 1. b) When first screen come up press F5 key for SLES 10 or F6 key for SLES 9 to load a driver, then select installation menu option c) Insert cd made with iso image from step 2.2 d) Follow the installation procedure to continue the OS installation. Tip: press ALT+CTRL+F4 to see whether the driver is loaded. ----------------- 3.2 Updating RHEL or SLES SAS driver on already installed system ----------------- This method is used to update IT/IR driver in a system, which is already installed with an older (or OS embedded) driver version. Here this procedure explains the manual process of updating the driver. Follow the steps given to update driver. 1) Boot the OS from primary controller/Disk. 2) Copy mptlinux rpm files to a temporary directory in the OS. 3) Query which version of the MPT driver is installed by running the command #rpm -qa | grep mpt2sas 4) (If result of step#4 is null, then skip this step.)Remove the bundled version of the MPT driver by running the command #rpm -e mpt2sas-- 5) Install the new version of the MPT driver by running the command #rpm -ivh mpt2sas---..rpm 6) Run command line #lsmod to check if mptsas has been loaded successfully. 7) Run command line #modinfo mpt2sas to make sure that the mpt2sas driver version has been updated 8) Completed. ================ Known Bugs ================ N/A ================ Fixes/Updates ================ version 19.00.00.00 version 18.00.00.00 Version 17.00.00.00 1. Fixed Kernel fails to allocate the memory requested for higher queue depth and/or higher MSIX vectors. 2. Fixed unbalanced reply queue to CPU mapping when max_msix_vectors is set Version 15.00.02.00-1 1. Add support for Intel(R) SAS Controller RS25LB040/80 2. Add support for RHEL 6U4 Version 14.00.00.00 1. Add support for RHEL 6U3 Version 13.00.00.00 1. Add support for Intel(R) SAS Controller RS25FB044 2. Add support for RHEL 6.2 and SLES11SP2 Version 11.40.00.00-2 1. Add support for RHEL 6.1 2. Initial release for Intel(R) Integrated RAID Modules RMS25JB040, RMS25JB080, RMS25KB040 and RMS25KB080 Version 10.00.00.00-5 1. Add support for SLES10SP4 and RHEL5U7 Version 8.00.00.00 1. Initial release for Intel(R) SAS Controller RS25GB008. version 7.255.03 1. Add Support for SLES11 SP1 2. Support Intel unique identification when Intel Subsystem IDs are detected. Version 5.00.02 1. Initial release for RMS2LL080 and RMS2LL040 modules *Other names and brands may be claimed as the property of others.