This release note and the software it accompanies it are copyright (c) 2003, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software. File name: RH72_drv_204.zip Driver version 2.04 This download supports SCSI Intel(R) Server RAID Controllers, please verify that this driver has been tested with the RAID controller you have chosen to use. You can verify compatability on the RAID controller's driver page at http://support.intel.com. Attention! =========== This download is created using a zip compression untility and is compatible with a variety of zip programs, please extract it to floppy diskette keeping the directory structure intact. Please refer to product and OS documentation for application instructions for this driver. Contents ========= File Version Size Date Description ----- -------- ----- ----- ------------ Modinfo n/a 1KB Modules.cgz 2.04 104KB 06/13/02 Driver Modules.dep n/a 0KB PCI Table n/a 5KB README.TXT n/a 2KB 2/4/02 This file Using This Tool ================ 1. Download the selected file. 2. Using a compatible zip program extract it to create the Red Hat 7.1 Installation driver diskette. 3. Ensure that you already created the the Red Hat 7.2 installation "Updates Disk" (rh72_upd_204.exe) With the driver and updates diskettes now created follow the instructions below. 1. Ensure the IIR controller is installed in your machine and is connected to drives on which you intend to create a host drive. 2. Boot your machine and when prompted press + to enter StorCon. Create a single host drive from your selected disks. For more information on creating host drives using the StorCon, refer to your user documentation. Read the Red Hat documentation to understand the disk space/size requirements for the Red Hat 7.2 installation. Note: Refer to the Red Hat Installation Manual before proceeding. 3. Ensure that the system is set to boot from the CD-ROM drive and boot to the Red Hat 7.2 CD-ROM. At the boot prompt type "linux dd updates". Press to continue. 4. The installer will prompt for a driver disk. Insert the driver diskette created in step 2 above and press. 6. When prompted, insert the updates diskette (created from the rh72_upd.exe) and press . 7. Follow onscreen instructions to complete your installation. Upon completion, remove the floppy diskette from the drive and reboot the system. *Third-party trademarks are the property of their respective owners.