================================================================================ Intel(R) Server Board S3420GPRX Intel(R) Server System SR1630GPRX, SR1630HGPRX and SR1695GPRX BIOS Release Notes ================================================================================ INTEL Enterprise Products and Services Division Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : May 11, 2012 TO : Intel(R) Server Platform customers SUBJECT : BIOS Release notes for version R0051 ================================================================================ LEGAL INFORMATION ================================================================================ Information in this document is provided in connection with Intel Products and for the purpose of supporting Intel developed server boards and systems. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (C) 2012 Intel Corporation. ================================================================================ ABOUT THIS RELEASE ================================================================================ Build Version : S3420GP.86B.01.00.0051 Build Date : May 11, 2012 ================================================================================ BIOS COMPONENTS/CONTENTS ================================================================================ Processors supported: Quad-Core Intel(R) Xeon(R) Processor 3400 Series Dual-Core Intel(R) Core(TM) Processor i3-500 Series Dual-Core Intel(R) Pentium(R) Processor G6950 On-oard Component Option ROM Versions: N/A LSI SWRAID Oprom : ESRT2 A.10.0225163I Intel(R) Matrix RAID Oprom : 10.8.0.1303 Intel(R) iSCSI Boot Oprom : v2.3.62 IBMC Matrox VGA : VBE BIOS V3.8SL 82574L PXE Version : Intel(R) Boot Agent GE v1.3.24 82578DM PXE Version : Intel(R) Boot Agent GE v1.3.35 82576 PXE Version : Intel(R) Boot Agent GE v1.3.38 82578DM EEPROM Version : v3.1 82574L EEPROM Version : v1.0 Management Engine Firmware Version : 6.0.30.1199 ================================================================================ SYSTEM FIRMWARE REQUIREMENTS ================================================================================ BIOS Update Utility: UEFI iFlash32 2.6 Build 15 Production boards: Product BIOS BMC FRUSDR S3420GPRX S3420GP.86B.01.00.0037 01.19 05 IMPORTANT Notice: 1. Intel(R) Core(TM) Processor i3-540, i3-530 C2 stepping CPU must work with BIOS 35 or later version. 2. Intel(R) Core(TM) Processor i3-540, i3-530 K0 stepping CPU must work with BIOS 42 or later version. 3. Please clear CMOS after BIOS update to activate ME-FW 6.0.20.1185 or later version if the onboard ME version is before 6.0.20.1185. 4. Please use Iflash32 version 2.6 build 15 or later version to support Microsoft* OEM Activation 2.0 process. ================================================================================ INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. User can update BIOS flash image via the following method A. UEFI iFlash32 2.6 Build 15 1. Boot the system to EFI Shell 2. Copy IFlash32.efi and BIOS R0051.CAP file to a HD or USB Flash Drive 3. Map the respective storage device in system with the command Shell> map -r 4. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 5. Run the IFlash32 utility on the prompt (or call "startup.nsh") fs0:\> IFlash32 R0051.CAP /u /ni 6. Reboot system after the update is completed. ================================================================================ BIOS RECOVERY INSTRUCTIONS ================================================================================ The Recovery process can be initiated by setting the recovery jumper (called BIOS Recovery Boot Jumper) A BIOS recovery can be accomplished from SATA CD and USB Mass Storage device. Please note that recovery from USB floppy is not supported on this platform. The SATA CD image for recovery is created using El-Torito format image (bootable). The recovery media must contain the following files under the root directory: 1. FVMAIN.FV 2. UEFI iFlash32 2.6 Build 15 3. *Rec.CAP 4. Startup.nsh (update accordingly to use proper *Rec.CAP file) BIOS starts the recovery process by first loading and booting to the recovery image file (FVMAIN.FV) on the root directory of the recovery media (SATA CD or USB disk). This process takes place before any video or console is available. Once the system boots to this recovery image file (FVMAIN.FV), it will boot automatically into EFI Shell to invoke the Startup.nsh script and start the flash update application (IFlash32.efi). IFlash32.efi requires the supporting BIOS Capsule image file (*Rec.CAP). After the update is complete, there will be a message displayed stating that the "BIOS has been updated successfully" indicating the recovery process is finished. The User should then switch the recovery jumper back to normal operation and restart the system by performing a power cycle. The following steps demonstrate this recovery process: 1. Power OFF the system. 2. Insert recovery media. 3. Switch the recovery jumper J1F3. Details regarding the jumper ID and location can be obtained from the Board TPS for S3420GP. 4. Power ON the system. 5. The BIOS POST screen will appear displaying the progress, and system automatically boots to the EFI SHELL. 6. Startup.nsh file executes, and initiates the flash update (IFlash32.efi) with new capsule file (*Rec.CAP). The regular IFlash message will be displayed at the end of the process, once the flash update succeeds. 7. Power OFF the system, and revert the recovery jumper J1F3 position to "normal operation". 8. Power ON the system. 9. Do *NOT* interrupt the BIOS POST during the first boot. ================================================================================ ME FIRMWARE UPDATE INSTRUCTIONS ================================================================================ A. UEFI iFlash32 2.6 Build 15 1. Boot the system to EFI Shell 2. Copy IFlash32.efi and ME.CAP file to a HD or USB Flash Drive 3. Map the respective storage device in system with the command Shell> map -r 4. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 5. Run the IFlash32 utility on the prompt fs0:\> IFlash32 ME.CAP /u /ni 6. AC cycle the system after the update is completed. ================================================================================ KNOWN ISSUES/WORKAROUNDS ================================================================================ - Intel(R) Core(TM) Processor i3 series must work with Ignition ME FW 6.0.20.1185 or later version. - Please clear CMOS after BIOS update to activate ME-FW 1185 or later version. ================================================================================ CHANGE HISTORY ================================================================================ R0051 ================================================================================ - Added: RMM3 password via BIOS setup can accept special characters. - Added: Matrix RAID(RST) OPROM is upgraded to V10.8.0.1303. - Fixed: Set maximum 16 bytes BMC user password of RMM3 in BIOS setup. - Fixed: Silicom 8 ports NIC module auto reboot issue. ================================================================================ R0050 ================================================================================ - Added: Intel(R) Matrix RAID supports 3TB or more capacity Hard Disk Drive. - Added: ESRT2 RAID supports 3TB or more capacity HDD. - Fixed: Some Intel PCIe Network Cards PXE boot failure issue. - Fixed: SRCSASJV card detection issue during system POST. - Fixed: 3TB HDD show wrong size in setup on SATA Enhanced and Compatibility mode. ================================================================================ R0049 ================================================================================ - Fixed: System fails to boot due to unrecoverable fatal error under certain condition with AXX4SASMOD RAID controller installed - Fixed: Aja* Kona3* PCIe card has blue screen issue with PCIE error event in SEL - Fixed: The unexpected spurious hard drive LEDs is light from SR1630HGP under certain conditions ================================================================================ R0048 ================================================================================ - Added: Power on Password feature support - Fixed: OEM Activation 1.0 OEM string can't be updated - Fixed: RST RAID makes Western Digital* HDD incomplete after degrading of RAID array ================================================================================ R0047 ================================================================================ - Added: Software RAID OPROM update - Fixed: Processor frequency incorrect when EIST disable and HT enable in BIOS - Fixed: PCI slot location shows incorrect - Fixed: Pass-through DMA support option still appear when populate non VT-D processor - Fixed: 3rd party utility can not display the boot order tab. ================================================================================ R0046 ================================================================================ - Fixed: LAN static IP will be lost in Win2K8 R2 /Win7 after BIOS update to 0045 ================================================================================ R0045 ================================================================================ - Fixed: Under SATA enhanced mode, two more HDDs w/o OS boot device order issue caused by BIOS R0043 ================================================================================ R0044 ================================================================================ - Fixed: CMOS setup shows memory no installed in setup menu after system reset ================================================================================ R0043 ================================================================================ - Added: Enhance BIOS region protection to avoid boot failure - Added: 6GB SAS module setup option in setup - Added: AHCI hotplug support - Added: Support Microsoft* SLP2.1 to preserve OEM Key after BIOS updates - Fixed: Windows 2008 R2 installation failure with 82576 Network Interface Controller - Fixed: NIC boot into 1st place always in boot sequence after enable SW RAID - Fixed: 30 errors and 1 warning event log in the SMBIOS test log file - Fixed: system shows an icon about safely remove PCIE card under windows 2008 - Fixed: Improve PCI bandwidth for Network device - Fixed: SAS module disable cause fatal error ================================================================================ R0042 ================================================================================ - Fixed: HT option can't be set in setup. ================================================================================ R0041 ================================================================================ - Added: Intel(R) Core(TM) Processor i3-500 series K0 stepping support. - Added: 3.5G memory support for Windows* XP sp2/sp3. - Fixed: SN and Asset Tag string change to read only. - Fixed: BIOS option "Memory Mapped I/O above 4GB" is not funcitonal. - Fixed: Key Press not recognized when booting to EFI Loader. - Fixed: 1-5-4-2 beep issue after system warm boot if CPU setting is changed. - Fixed: PCIe device control register error reporting enable which are disabled by ESS sync. - Fixed: VTD auto detection setup control - Roll back CPU HT/VT/MC setup setting help string. ================================================================================ R0040 ================================================================================ - Fixed: 1-5-4-2 BEEP issue aftery system reboot if CPU setting is changed. ================================================================================ R0039 ================================================================================ - Fixed: R38 install Windows* 2008 64bit UEFI system, the screen displays abnormality. ================================================================================ R0038 ================================================================================ - Update ME F/W to 1199 - Fixed: PCIe error detected by AER root error status, and shorten Suse11 boot black screen time. - Fixed: Data parity error - PERR and Address parity error - SERR test fail. - Add help string to DHCP host name. ================================================================================ R0037 ================================================================================ - Fixed: SMBIOS type 10 onboard device LAN string - Fixed: in EWS P1 thermal ctrl sensor reading is abnormal - Remove Non-production processor uCode [END OF RELEASE NOTES]