================================================================================ Intel(R) Server Platform BIOS Release Notes ================================================================================ INTEL(R) Server Boards and Systems Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : Dec 18 2015 TO : Multi-Core Intel(R) Xeon(R) Processor-Based Server Platform customers SUBJECT : BIOS Release notes for version R01.01.0014 ================================================================================ LEGAL INFORMATION ================================================================================ INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined". Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.htm Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (C) 2013~2015 Intel Corporation. ================================================================================ ABOUT THIS RELEASE ================================================================================ Build Stamp : SE5C610.86B.01.01.0014 Build Date : Dec 18 2015 ================================================================================ Supported Platforms ================================================================================ S2600WT Family S2600KP Family S2600TP Family S2600CW Family ================================================================================ BIOS COMPONENTS/CONTENTS ================================================================================ Processors supported: Intel(R) Xeon(R) processor E5-2600 v3 series Processor Intel(R) Xeon(R) processor E5-2600 v4 series Processor Microcode update versions: CPUID Version Status 0x306f2 0x00000036 Production (E5-2600 v3 C0/C1) 0x406f1 0x0b00000e External (E5-2600 v4 B0) On-Board Component Option ROM Versions: all_gigabit_pxe_v1.5.70.LOM - 1G PXE OpROM v1.5.70 (for all PCSD gigabit controllers, including LOMs and I/O modules) all_10g_pxe_v2.3.41.LOM - 10G PXE OpROM v2.3.41(for all PCSD 10G controllers, including LOMs and I/O modules) all_iscsi_v3.0.48.LOM - iSCSI Boot OpROM v3.0.48(for all PCSD gigabit and 10G EPSD controllers, including LOMs and I/O modules) all_10g_fcoe_v1.8.17.LOM - 10G FCoE OpROM v1.8.17(for PCSD 10G Niantic I/O module) X540_Fcoe.LOM - 10G FCoE OpROM v1.8.24(for PCSD 10G X540 controllers, including LOMs and I/O module) E4702X4.EFI - 10G PCIe gigabit controller UEFI driver ver 4.7.02 E6604X3.EFI - 1G controller UEFI driver ver 6.6.04 sSataOrom.bin - sSata RAID OpROM V4.3.0.1018 SataOrom.bin - Sata RAID OpROM V4.3.0.1018 SataDriver.efi - Sata UEFI RAID OpROM V4.3.0.1018 sSataDriver.efi - sSata UEFI RAID OpROM V4.3.0.1018 ESRT2.ROM - ESRT II legacy OpROM A.14.10171446I EfiSasDriver.efi - ESRT II UEFI RAID OpROM 03250000 ACM : v03.00.01(PW version) Reference Code Version : v2.9.0 Management Engine Firmware Version : 03.01.03.005 Security Revision : 0606 ================================================================================ INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. 1.User can update BIOS flash image via either of the follow methods... 1.) Copy the entire contents of the Package file to the HDD or USB flash drive. (All of the files must reside in the same directory.) 2.) Boot to UEFI Shell, then change the Shell to the mapped device file system Example: Shell> fs0: (or fs1:) 3.) Run updAll.nsh for BIOS, ME and FD region upgrade together. updBios.nsh, updME.nsh and updFD.nsh for each region upgrade respectively. 4.) Reboot system after the update is completed. 5.) Do *NOT* interrupt the BIOS POST during the first boot. 2.BIOS update under recovery mode as below methods The USB media is necessary for primary BIOS upgrade and must contain the following files under the root directory, you can capture all the ingredients from BIOS release package: 1.) UEFI iFlash32 (including IFlash32.efi and ipmi.efi ) 2.) *.CAP( the released BIOS capsule which version you expect to update) 3.) Startup.nsh (update accordingly to use proper *.CAP file) A: Install USB media after recovery boot to shell, you need to follow below steps 1.) Under Shell, type "map -r" to map all disc 2.) Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3.) Execute the startup.nsh scripts for BIOS update, wait for BIOS update complete 4.) Power OFF the system, and revert the recovery jumper position to "normal operation". 5.) Power ON the system. 6.) Do *NOT* interrupt the BIOS POST during the first boot. B: Installed USB media prior to recovery boot It will boot automatically into EFI Shell to invoke the Startup.nsh script and start the flash update application (IFlash32.efi). IFlash32.efi requires the supporting BIOS Capsule image file (*.CAP). After the update is complete, there will be a message displayed stating that the "BIOS has been updated successfully" indicating the recovery process is finished. The User should then switch the recovery jumper back to normal operation and restart the system by performing a power cycle. Notes: If to update backup BIOS region, you need to customize the iflash32 update scripts and add "UpdateBackupBios" parameter Notes: Setup variable structure has been changed in S2600V4 BIOS. If downgrading S2600V4 BIOS to lower versions or S2600V3 BIOS, please add 'NvramUpdate' parameter. ================================================================================ BIOS RECOVERY INSTRUCTIONS ================================================================================ The Recovery process can be initiated by setting the recovery jumper (called BIOS Recovery Boot Jumper) A BIOS recovery can be accomplished from backup BIOS region. BIOS starts the recovery process by first loading and booting to the recovery image from backup BIOS region. This process takes place before any video or console is available. Once the system boots to recovery image. The following steps demonstrate this recovery process: 1. Power OFF the system. 2. Switch the recovery jumper. Details regarding the jumper ID and location can be obtained from the Server Board TPS for that Platform. 3. Power ON the system. 4. The BIOS POST screen will appear displaying the progress and system automatically boots to the EFI SHELL. 5. Follow the BIOS recovery update manual for BIOS recovery. ================================================================================ ME FW Capsule INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. !!!!! Please make sure AC plug in during update !!!!! !!!!! AC failure during update may cause damage to your system and unrecoverable !!!!! User can update ME image via either of the follow methods: 1. Copy the entire contents of the DXXX_Package.zip archive file to the HDD or USB flash drive. (All of the files in the zip archive must reside in the same directory.) 2. Boot to UEFI Shell, then change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3. Use updME.nsh and updFD.nsh for ME FW upgrade. 4. Reboot system after the update is completed. ================================================================================ IMPORTANT NOTICE ================================================================================ 1. The BIOS R01.01.0002 auto scripts will force to update both normal and backup BIOS region since security revision was updated, Once user upgrade BIOS to R01.01.0002, it will prevent BIOS downgrade to previous version that with low security revision, user can use BIOS recovery mode for BIOS downgrade 2. The BIOS R01.01.0003 included security fix and security revision upgrade, refer to item #1. 3. If doing online BIOS update to R01.01.0003, user must use the auto scripts enabled in the release package which will force update BIOS NVRAM and backup region. 4. BIOS R01.01.0004 requires update of NVRAM and backup region. 5. BIOS R01.01.0009 and D0019 will enable UEFI Secure Boot and include below limitations: - Please read "BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD" section in this BIOS release notes - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade. - BIOS downgrade is not allowed if user has enabled BIOS secure boot. All customer setting will be lost also if downgrade to previous BIOS release. - Backup BIOS region is also required to be updated to prevent recovery failure please use release package to update BIOS. - There is downgrade hang risk if you don't follow above rules. - Further BIOS release will not suffer from these side effects as the NVRAM region is formatted as authenticated variable storage 6. System will hang 0xbf after downgrading BIOS from D0055(BDW code tree) to R0011/R0009(HSW code tree) randomly. -Set SUT to recovery mode to power on, then set it back to normal boot to see whether it is recovered. ================================================================================ BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD ================================================================================= 1. Customer Setting Loss Issue and Mitigation Method When user upgrades BIOS with secure boot feature, the NVRAM will be automatically formatted as authenticated variable physical storage. However, all previous customer settings storage in NVRAM will be lost even if user does not enable UEFI secure boot feature. Users can take the follow recipe to save and restore their settings based on the actual NVRAM usage if they wish to upgrade or downgrade between BIOS with or without secure boot feature. Supposing customer requires to save & restore their specific NVRAM named 'var': Steps: 1. Prepare FAT partition USB key (or HDD). 2. Boot to EFI shell. 3. Check the file system mapping (e.g. fs0:) of the USB key with 'map -r' command. 4. Use 'dmpstore var -s fs0:\var.bin' to save the variable to the physical file. 5. Perform BIOS update and reboot system. 6. Boot to EFI shell. 7. Use 'dmpstore var -l fs0:\var.bin' to restore the variable. 8. Reboot the system if the customer setting requires reboot to take effect. Notes: 1. Immediate reboot after BIOS update is mandatory. Or the restore operation will not take effect. 2. Customers can repeat step 4 and step 7 for several times if they need to save & restore multiple NVRAM variables. 3. Most of BIOS customer settings by SysCfg can also be restored in this way. Customers can follow previous step1~8 by substituting 'Setup' for 'var' in the sample. 4. For BIOS downgrade case, step7 cannot be used to restore authenticate variables (e.g. PK, KEK, DB, DBX) to non-authenticated NVRAM storage 2. Recovery Mode Failure There is known bug that it cannot POST successfully with authenticated NVRAM storage. This will cause platform recovery failure and permanent deny of service (PDOS) if the primary BIOS region gets corrupted for some reason. It is required to update backup BIOS region when upgrade BIOS capsule with secure boot feature. Notes: For downgrade case, user is not required to update backup BIOS region as new BIOS with secure boot feature can handle NVRAM with old storage format: it will format it to new authenticated variable storage automatically. However, care must be taken when downgrading BIOS in recovery mode: After flashing BIOS without secure boot feature, user should restore recovery HW jumper immediately before platform reset.If platforms reset occurs before restoring recovery HW jumper, the backup BIOS will once again format NVRAM to new storage format, which will cause newly flashed BIOS (without secure boot feature) POST failure after user restores recovery HW jumper. ================================================================================ FEATURES ADDED/REMOVED ================================================================================ ================================================================================ R01.01.0003 (Production Release) ================================================================================ ================================================================================ R01.01.0004 (D633) ================================================================================ EPSD100026893 i350(Powerville) IOM OpROM doesn't load during post EPSD100244275 Cannot enable TXT and receive BIOS POST Code 0xA100 EPSD100244186 Power Restore Delay Value minimum not long enough for BMC boot time EPSD100244174 Security vulnerability on SMI GetVariable interface was captured by SeCOE ================================================================================ R01.01.0004 ================================================================================ EPSD100026935 The Default Value Of SOL And Console Redirection EPSD100244254 Pre-Release 40G IOmodule fails the link margin test with concurrent traffic on slot2 IOM riser+carrier. EPSD100244186 Power Restore Delay Value minimum not long enough for BMC boot time EPSD100026931 Show error message when disabled boot devices EPSD100244439 [X] Customized riser card on riser slot 2 can't detect InfiniBand* card EPSD100244388 "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won't be changed once change its status with syscfg. EPSD100243547 Pre-release 40G IOmodule fails the link margin test with concurrent traffic on slot2 IOM riser+carrier. EPSD100244367 Add 19.3 NIC package EFI driver and FCOE ROM EPSD100244376 Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" and "Shutdown Policy" EPSD100244377 Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" EPSD100244374 Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" and "Shutdown Policy" EPSD100244379 Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" EPSD100244371 "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won't be changed once change their status with syscfg. EPSD100244380 "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won't be changed once change their status with syscfg. EPSD100244387 "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won't be changed once change its status with syscfg. EPSD100244394 uEFI iSCSI Boot attempts can be saved without filling in the target name ================================================================================ R01.01.0005 ================================================================================ EPSD100244208 SEL intermittently reports therm trip ================================================================================ R01.01.0006 ================================================================================ EPSD100245152 SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge EPSD100243827 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100026915 The Hdds couldn't be found on the RHEL7.0 when storage card 81605Z inserted in the test riser4_slot4_PCIex16. EPSD100244480 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100243758 Display L2/L3 cache error detected on the RAID controller during post . EPSD100026786 SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting. ================================================================================ R01.01.0007 ================================================================================ EPSD100245440 LAN1 link down when doing DC cycle test with ITAS ================================================================================ R01.01.0008 (D691, D683, D670, D660) ================================================================================ EPSD100244480 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100243827 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100026786 SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting. EPSD100026173 Driver Health Protocol (DHP) not working correctly on Wildcat Pass EPSD100244587 Incorrect ACPI table causes NUMA issues in Linux EPSD100244594 System booted with only 1 QPI link trained, no errors reported EPSD100026973 Dual port IB IOM G52882-351 is showed as "single-port" description in BIOS setup menu. EPSD100243758 Display L2/L3 cache error detected on the RAID controller during post EPSD100244393 uEFI iSCSI boot configuration is lost after reboot EPSD100244993 New ESRT2 OpROM and uEFI Driver for Grantley EPSD100245152 SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge EPSD100244738 If Unplug USB scanner and then re-plug scanner back in ,USB scanner is inactive EPSD100240251 Secondary SATA info loading before Primary SATA info EPSD100244362 CCB# 273 : QRE: Reset after CATERR leaves system in a hung state" is open for annotation EPSD100245307 Pressing multiple F6 from SOL skips through boot manager. EPSD100244490 BIOS isn't reporting QPI link errors. EPSD100027078 Help text "Intel(R) ESRT2 (LSI*)" RAID mode not match with BIOS. EPSD100027079 Help text "Intel(R) ESRT2 (LSI*)" RAID mode not match with BIOS. EPSD100027080 Help text "Intel(R) ESRT2 (LSI*)" RAID mode not match with BIOS. EPSD100245480 TPM2.0 module can't work EPSD100245498 TPM2.0 module can't work EPSD100027076 [SMBIOS] Type 8 no information for NGFF (M.2) device EPSD100245810 Syscfg_v13.1.4:a lot of invalid BIOS items displayed in syscfg.ini by command:syscfg /s syscfg.ini /f /b EPSD100245811 Sysinfo_v13.1.5:a lot of invalid BIOS items displayed at 'BIOS Settings' part in sysinfo_log.txt by command:sysinfo -ni EPSD100245884 New ESRT2 1.43 OpROM for inclusion into Grantley Production BIOS EPSD100246585 USB Scanner can't work stably in EFI shell with Bios 691 BIOS Workaround for CWP 10G NIC OpROM issue Roll back PXE OpROM V2.3.30 and UEFI V4.5.19 update Remove 1.43 UEFI ESRT2 OpRom Security Fix: Smm range check for signed update ================================================================================ D001 ================================================================================ RC sync to V1.61 release ================================================================================ D002 ================================================================================ EPSD100027459 No SEL event when build memory Mirror from Independent mode. EPSD100027270 [Broadwell Refresh] After change a few items, then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100027520 There's yellow mark in device manager and Add-in VGA missed. EPSD100027469 Setup Memory "Correctable Error Threshold" option value show "!". EPSD100027299 "Total Memory" information not correct in mirror/spare mode. EPSD100027300 "Total Memory" information not correct in mirror/spare mode. EPSD100027282 For user privilege,user still can change item [Enable CPU HWPM]. EPSD100027283 The value of setup item "Active Processor Cores" cannot be changed ================================================================================ D003 ================================================================================ EPSD100247219 [BDW] Syscfg does not work with Broadwell BIOS EPSD100027371 [Broadwell Refresh]TXT - Trusted Boot run txt-stat utility - results error EPSD100027270 [Broadwell Refresh] After change a few items, then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100028110/EPSD100028123/EPSD100028123 [Broadwell Refresh]There's no comment about it need to add "UpdateNvram" when downgrade to D001 in D002 release note. ================================================================================ D004 ================================================================================ EPSD100028363 [Broadwell Refresh] BDW ES2 QHUP CPU Cores will be changed after SUT reset. EPSD100028359 [Broadwell Refresh] BIOS setup item "Active Processor Core" will disappear when using BDW ES2 QHUP CPU. EPSD100028377 [Broadwell Refresh] SMBIOS Type 17 cannot report correct memory speed. EPSD100028218 [Broadwell Refresh]After trigger SBE/MBE, SUT will hang up or can't normal reboot into windows. EPSD100247397 [Broadwell Refresh]BSOD displayed when boot to W2012R2 after change active processor cores and HT in SetUp. EPSD100028143 [Broadwell Refresh]Insert PCIe add-on card on CPU2 port 3a , SUT cannot boot into RHEL7.0 /Suse11.3 x64bit EPSD100247300 [BDW] "QPI Fatl Sensor events" logged in SEL EPSD100247194 [BDW] RS2WC080 causes the system to IERR when inserted into Riser Slot 1 EPSD100028627 [BDX-R] ITP got error messages in status register. EPSD100028588 SUT will hang at POST when set BIOS setup item [Uncore Frequency Scaling] to Disabled. EPSD100028642 [Broadwell Reflesh] There's SBE/MBE event in W2K12 R2 when Error Cloaking set as "Enable" ================================================================================ D005 ================================================================================ EPSD100247222 [BDW] Populating more than 10 8GB DIMMs causes IERR before POST. EPSD100028852 [Broadwell Refresh] After change "Active Processor Cores" , then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100028848 There's PPR Type / PPR Error Injection test in BIOS Setup menu. EPSD100028879 [Broadwell Refresh] DRIVER NAME not match IMAGE NAME in Driver list ================================================================================ D006 ================================================================================ EPSD100028888 [Broadwell Refresh] F9 load default Confirm page will display twice. EPSD100028870 [Broadwell Refresh] Lost a lot of SMBIOS Information via PETs to dump data. EPSD100028873 [Broadwell Refresh]Cannot flash FUR/SDR by NSH file EPSD100028891 [Broadwell Refresh]USB Mass Storage Device will disappear when Press F9 to load default setting EPSD100028464 [Broadwell Refresh]Wrong label string when load default in Legacy Network Device Order page ================================================================================ D0009 ================================================================================ EPSD100029213:[Broadwell Refresh]ME version not match release note when using iflash tool EPSD100029182:[BDW] SUT can't boot into Windows 2K12 when CPU1 insert 4 DIMMs w/ MFG mode. EPSD100028387:[Broadwell Refresh] ?Kernel-Processor-Power" error log in Windows System Event log. ================================================================================ D0012 ================================================================================ Update ACM binary to version v02.07.01 ================================================================================ D0016 ================================================================================ update RSTOpROM to 4.3 EPSD 100248789 : [BDW]Win2008r2 SP1 can't install with UEFI mode in BIOS D004 sync CR_1862: EPSD 100248324 : Windows RSTe GUI will not start when Grantley system is in UEFI mode. EPSD 100029047 Processor Thermal Trip is tiggered while heat DIMM's temperature to UC. Update HSW ucode to 0x2e. sync CR_1860: EPSD 100028979 : After RHEL 7.1(UEFI) OS installation by using 4Kn HDD as system disk, cannot reboot into OS. sync CR_1857: EPSD 100248578 : (X) BMC WEB GUI does not display memory config with 64GB LRDIMMS. sync CR_1855: EPSD 100029220 : The count of maximum USB mass storage devices cannot match with EPS description. sync CR_1851: EPSD 100029123 :[R0009]System will display warning message when enable Cluster on Die sync CR_1845: [ EPSD 100028064 ][24HDD] Suggest add/change some information of SMBIOS Data Add some HWPM related fix ================================================================================ D0019 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150710_CP_PCSD_GRANTLEY_REFRESH_11_01_D0017 UEFI Secure Boot sync: CP_CR_1848 EPSD 100248718 : WCP - NVRAM clear fails when initiated in UEFI Secure Boot mode UEFI Secure Boot sync: CP_CR_1782 EPSD 100028678 : [D730] SUT will get IERR event when enable secure boot via ITK or Syscfg UEFI Secure Boot sync: CP_CR_1764 Errata to CR_1784 UEFI Secure Boot sync: CP_CR_1763 EPSD 100029185 :Clone of: [D748]Boot into unsign OS the Error Message will shortag UEFI Secure Boot sync: CP_CR_1800 EPSD 100028683 : New failure item of SCT UEFI Secure Boot sync: CP_CR_1798 Disable INT10 workaround in case secure boot has been enabled UEFI Secure Boot sync: CP_CR_1784 Enhance secure boot error handler to cover RHEL 6.5 created boot option UEFI Secure Boot sync: CP_CR_1777 Deploy formal secure boot keys for Grantley product BIOS Updating PCSD_Grantley_Refresh BIOS IDs: 20150714_CP_PCSD_GRANTLEY_REFRESH_11_01_D0018 UEFI Secure Boot sync: Enable macro SECURE_BOOT_ENABLE EPSD 100248594 : [BDW refresh]-sysinfo_13.1.9:some information shown nothing in F2 setup while sysinfo.log has shown Updating PCSD_Grantley_Refresh BIOS IDs: 20150715_CP_PCSD_GRANTLEY_REFRESH_11_01_D0019 RC sync to V 1.8.1 ================================================================================ D0024 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150716_CP_PCSD_GRANTLEY_REFRESH_11_01_D0020 EPSD 100248918 : [BDW refresh]-syscfg_v13.1.12: system can't reboot after run the command 'syscfg /bldfs ' EPSD 100029348 : [Broadwell Refresh]System will hang ,when set CMOS jumper to pin2-3. Updating PCSD_Grantley_Refresh BIOS IDs: 20150717_CP_PCSD_GRANTLEY_REFRESH_11_01_D0021 roll back ME to 03.01.02.002 Updating PCSD_Grantley_Refresh BIOS IDs: 20150720_CP_PCSD_GRANTLEY_REFRESH_11_01_D0022 EPSD 100247222 : [BDW] Populating more than 10 8GB DIMMs causes IERR before POST Updating PCSD_Grantley_Refresh BIOS IDs: 20150721_CP_PCSD_GRANTLEY_REFRESH_11_01_D0023 Create PCI-e CTLE setting hook routine and fill in correct values. EPSD 100029519 : [broadwell refresh]A fail screen will pop up when do F9 or change some setting,then press F10. EPSD 100249052 : [Broadwell Refresh] ACPI Table is published not correct when set "Enable CPU HWPM" = HWPM NATIVE MODE / HWPM OOB. Updating PCSD_Grantley_Refresh BIOS IDs: 20150722_CP_PCSD_GRANTLEY_REFRESH_11_01_D0024 EPSD 100029366 :[BDW]WHEAHCT Logo Test failed during Windows 2012 R2 WHQL test ================================================================================ D0028 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150723_CP_PCSD_GRANTLEY_REFRESH_11_01_D0025 Force to update WrCRC and WrCrcErrFlow setting. Updating PCSD_Grantley_Refresh BIOS IDs: 20150724_CP_PCSD_GRANTLEY_REFRESH_11_01_D0026 EPSD 100029490 /EPSD100029487 [BDW] The help Message of BIOS Setup item "Secure Boot Configuration" and "Attempt Secure Boot" cannot match with EPS 1.15 update HSX ucode to 0x32 Updating PCSD_Grantley_Refresh BIOS IDs: 20150728_CP_PCSD_GRANTLEY_REFRESH_11_01_D0027 EPSD 100249057 : [BDW refresh] BIOS Memory SPD dump information is not correct for DDR4 caused by offset mismatch with DDR4 spec EPSD 100029556 :[Broadwell Refresh] Latest BDW CScript cannot be used with D0019 BIOS, but D0016 works well. FUpdating PCSD_Grantley_Refresh BIOS IDs: 20150729_CP_PCSD_GRANTLEY_REFRESH_11_01_D0028 EPSD 100029560 :[Broadwell Refresh] Enable SBO, sSTATA ESRT2 RAID didn't rollback the top of SBO after re-install HDDs. RC sync to V1.8.5 ================================================================================ D0036 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150731_CP_PCSD_GRANTLEY_REFRESH_11_01_D0029 sync CR_1873: EPSD 100029609 : ME version is not correct ,when disabled Quiet Boot function. sync CR_1872: EPSD 100029576 : [Broadwell Refresh] SMBIOS Type 8 Serial Port type not correct. EPSD 100249098 : [BDW]Get abnornmal message while press F10 in BIOS setup with BKC D00019 BIOS Cottonwood Pass CCB 279: Support for 4X4 PCIe bifurcation support on all X16 PCIe Slot Updating PCSD_Grantley_Refresh BIOS IDs:20150801_CP_PCSD_GRANTLEY_REFRESH_11_01_D0030 sync CR_1874: EPSD 100249073 Problems with the static boot order on a WCP system with an Umbrel Updating PCSD_Grantley_Refresh BIOS IDs: 20150803_CP_PCSD_GRANTLEY_REFRESH_11_01_D0031 EPSD 100029365 : [BDW]USB Exposed Port System Test failed during Windows 2012 R2 WHQL test. Updating PCSD_Grantley_Refresh BIOS IDs: 20150804_CP_PCSD_GRANTLEY_REFRESH_11_01_D0032 W/A for some pcie gen2 link width not stable Add BDX B0 uCode (0x0b000006) Updating PCSD_Grantley_Refresh BIOS IDs: 20150805_CP_PCSD_GRANTLEY_REFRESH_11_01_D0033 EPSD 100249090 NTB has the performance issue with Grantley BIOS 1.01.0008 Updating PCSD_Grantley_Refresh BIOS IDs: 20150806_CP_PCSD_GRANTLEY_REFRESH_11_01_D0034 Remove BDX B0 ucode Updating PCSD_Grantley_Refresh BIOS IDs: 20150810_CP_PCSD_GRANTLEY_REFRESH_11_01_D0035 EPSD 100029691 :[Broadwell Refresh] Variables didn't be clear by NVRAM reclaim function. EPSD 100029635 :[Broadwell Refresh]Error manager information not match EPS1.15 define when install Bad SPD DIMM. EPSD 100249249 : Can't install RHEL_7.1&SLES12 in ESRT2/RAID Controller (RS3DC080) with BKC BIOS. Updating PCSD_Grantley_Refresh BIOS IDs: 20150811_CP_PCSD_GRANTLEY_REFRESH_11_01_D0036 EPSD 100029520 :[Broadwell Refresh]Current Secure Boot State should be Enable when Press F9 to load default setting. ================================================================================ D0044 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150812_CP_PCSD_GRANTLEY_REFRESH_11_01_D0037 EPSD 100029647 / EPSD100029648/ EPSD100029650: [Broadwell Refresh]Onboard video function cannot enable when insert VGA card in Riser2 and Riser3 Updating PCSD_Grantley_Refresh BIOS IDs: 20150813_CP_PCSD_GRANTLEY_REFRESH_11_01_D0038 EPSD 100029539 :[BDW]The PCIe root port of BSP will be hidden. Updating PCSD_Grantley_Refresh BIOS IDs: 20150814_CP_PCSD_GRANTLEY_REFRESH_11_01_D0039 EPSD 100249414 : [BDW]System get hang while press F10 to save and exit in BIOS Setup Updating PCSD_Grantley_Refresh BIOS IDs: 20150819_CP_PCSD_GRANTLEY_REFRESH_11_01_D0040 NO SIGHTING: Sync RC setup default settings. Updating PCSD_Grantley_Refresh BIOS IDs: 20150820_CP_PCSD_GRANTLEY_REFRESH_11_01_D0041 [ EPSD 100249336 ]BIOS not populating all SMBIOS Type 17 information from ADATA AD4R2133Y16G15-BHYM DIMM Update ME to 03.01.03.004 Updating PCSD_Grantley_Refresh BIOS IDs: 20150821_CP_PCSD_GRANTLEY_REFRESH_11_01_D0042 EPSD 100029520 :[Broadwell Refresh] System Boot Timeout value will not back to default setting when Clear CMOS by jumper. Updating PCSD_Grantley_Refresh BIOS IDs: 20150824_CP_PCSD_GRANTLEY_REFRESH_11_01_D0043 EPSD 100029782 :[BDW_D0037_Bx] SUT will get IERR when install OS process. Updating PCSD_Grantley_Refresh BIOS IDs: 20150825_CP_PCSD_GRANTLEY_REFRESH_11_01_D0044 Addendum to EPSD 100029782 :[BDW_D0037_Bx] SUT will get IERR when install OS process. Known Issues: [EPSD100249582][BDX] Micron MT72ASS4G72LZ-2G1A1 LRDIMMs cause correctable memory errors. [EPSD100249319][broadwell refresh] 32GB 2400MHz Samsung LRDIMM missed in MVL cycling test. [EPSD100249031][BDW][OS Install] Some error/fail messages display in the log after VMWare ESXi6.0 installed on AHCI controller. [EPSD100029164][BDW]Boot failed after sles11 sp3 x86 install finished in AHCI ESRTII raid1+SSATA ESRTII raid1 or SSATA ESRTII raid1+ AHCI ESRTII raid1. [EPSD100027916][BDW] window 2012 R2 64bit,exsit some errors in event log with new BDW CPU. ================================================================================ D0055 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150831_CP_PCSD_GRANTLEY_REFRESH_11_01_D0045 EPSD 100029168 :[BDW]windows cannot be installed to disk1 when install windows2008r2 Updating PCSD_Grantley_Refresh BIOS IDs: 20150901_CP_PCSD_GRANTLEY_REFRESH_11_01_D0046 EPSD 100249349 : DFT violation 2122, BIOS needs to fill out the Physical Slot Number field in the Slot Capabilities Register (Offset 14h) in PCI Config Space. Updating PCSD_Grantley_Refresh BIOS IDs: 20150902_CP_PCSD_GRANTLEY_REFRESH_11_01_D0047 EPSD 100249399:For unsupported PCIe riser card configuration, PCIe bifurcation setting should display as not support text instead of showing blank screen. Updating PCSD_Grantley_Refresh BIOS IDs: 20150907_CP_PCSD_GRANTLEY_REFRESH_11_01_D0048 EPSD 100029947 :[HSX] Spelling error "complated" in Intel BIOS DHP screen Sync with RC V2.0.0 release Updating PCSD_Grantley_Refresh BIOS IDs: 20150908_CP_PCSD_GRANTLEY_REFRESH_11_01_D0049 EPSD 100249031 :[BDW][OS Install] Some error/fail messages display in the log after VMWare ESXi6.0 installed on AHCI controller Updating PCSD_Grantley_Refresh BIOS IDs: 20150911_CP_PCSD_GRANTLEY_REFRESH_11_01_D0050 EPSD 100249435 :[HSX](X) Intel System BIOS DHP issue with Intel Hardware RAID controllers that have pinned cache sync CR_1881: Cray Critical Performance Issue IPS 6000121610 Updating PCSD_Grantley_Refresh BIOS IDs: 20150916_CP_PCSD_GRANTLEY_REFRESH_11_01_D0051 (CL282269)Sync IERR WA CR_1895,CR_1896 on BDX (CL282269)CP_CR_1895 EPSD 100029296 BCP 24HDD PCIe SSD lost during ACDC cycling (CL282269)CP_CR_1896 Add 3s delay for SSD no response EPSD 100029988 :[Broadwell Refresh]The Help Text of Enforce Recommended Memory Speed option not match EPS1.15 Updating PCSD_Grantley_Refresh BIOS IDs: 20150917_CP_PCSD_GRANTLEY_REFRESH_11_01_D0052 [BDW]add a warning message when BDX processor is populated sync CR_1898 Update HSX CPU ucode to 0x36 Updating PCSD_Grantley_Refresh BIOS IDs: 20150918_CP_PCSD_GRANTLEY_REFRESH_11_01_D0053 Addendum to CL283165 Change the BDX bootable bios warning message according to IVB refresh. addendum to CL282747 Updating PCSD_Grantley_Refresh BIOS IDs: 20150922_CP_PCSD_GRANTLEY_REFRESH_11_01_D0054 CCB381: To add BIOS setup option to allow DPDK performance tuning for IIO snoop response hold off timep Updating PCSD_Grantley_Refresh BIOS IDs: 20150923_CP_PCSD_GRANTLEY_REFRESH_11_01_D0055 Roll back CL282269 Remove BDW A stepping ucode, add BDW B stepping ucode Addendum to CL280589 ================================================================================ D0058 ================================================================================ Addendum to changelist 257407: Create PCI-e CTLE setting hook routine and fill in correct values Updating PCSD_Grantley_Refresh BIOS IDs: 20150925_CP_PCSD_GRANTLEY_REFRESH_11_01_D0056 EPSD100030087:[Broadwell Reflesh] SUT hangs at 0xBF after downgrade BIOS from D0055 to R0009/R0011 randomly [BDX] Sync RC 2.4.0 release. Updating PCSD_Grantley_Refresh BIOS IDs: 20150928_CP_PCSD_GRANTLEY_REFRESH_11_01_D0057 Update BDW B0 ucode Updating PCSD_Grantley_Refresh BIOS IDs: 20150929_CP_PCSD_GRANTLEY_REFRESH_11_01_D0058 ================================================================================ D0064 ================================================================================ EPSD100249408: [x]BIOS does not honour ver 1 PCIe capabilities header on Wildcat Pass platform Updating PCSD_Grantley_Refresh BIOS IDs: 20151012_CP_PCSD_GRANTLEY_REFRESH_11_01_D0059 BCP NVMe WA:<1>IIO delay training.<2> SBR to prevent PCIe link downgrade happen. Updating PCSD_Grantley_Refresh BIOS IDs: 20151013_CP_PCSD_GRANTLEY_REFRESH_11_01_D0060 EPSD100250188: BIOS not supporting Package C6 remove the EPSD_2016_YEAR_DEBUG build option Updating PCSD_Grantley_Refresh BIOS IDs: 20151014_CP_PCSD_GRANTLEY_REFRESH_11_01_D0061 EPSD100250325:BDW BIOS 0044 missing Aries support Install BDX B0 CPU QPI and PCI-e CTLE value setting. Updating PCSD_Grantley_Refresh BIOS IDs: 20151016_CP_PCSD_GRANTLEY_REFRESH_11_01_D0062 EPSD100029367 On SAS SKU, press F9 to load default in UEFI mode, then press F10 to save Setup menu, it will pop up a fail screen as picture. The CTLE settings for BDX B0 stepping processor --- CWP Updating PCSD_Grantley_Refresh BIOS IDs: 20151019_CP_PCSD_GRANTLEY_REFRESH_11_01_D0063 [BDX] Sync with RC 2.9.0 early release.V269.D05 EPSD100030019: [R1011] SMBIOS Type 17 Manufacturer string missed with NVDIMM - Viking. EPSD100030022: [R1011] SMBIOS Type 17 cannot report correct memory speed with NVDIMM - Smart. Add biosId manually for daily build. ================================================================================ D0070 ================================================================================ EPSD100030146: [Broadwell Refresh] WCP with LRDIMM Rank Sparing mode Total Memory size not correct. Updating PCSD_Grantley_Refresh BIOS IDs: 20151021_CP_PCSD_GRANTLEY_REFRESH_11_01_D0065 EPSD100030015: [R1011] SUT will halt after change Syetem Date / Time to maximum value. EPSD100249435: [HSX] (X) Intel System BIOS DHP issue with Intel Hardware RAID controllers that have pinned cache. Updating PCSD_Grantley_Refresh BIOS IDs: 20151026_CP_PCSD_GRANTLEY_REFRESH_11_01_D0066 EPSD100250328/EPSD100250426: [BDW] TXT MeasuredLaunchEnvironment Function test fail on D0058 BIOS./Tboot result is "FALSE" with TPM2 on BDW. Remove 'UpdateNvram' support for iflash32 tool for security reason of SRA bios. EPSD100110737 (X) PCR1 not constistent on TPMTXT Enabled Kennedy Pass System. Updating PCSD_Grantley_Refresh BIOS IDs: 20151027_CP_PCSD_GRANTLEY_REFRESH_11_01_D0067. Update TXT ACM binary to v3.0.1(PW) Remove Extended ATR and Pfloor tuning setup menu for DCA IERR issue (TOR timeout symptoms). Update ME to 03.01.03.013 Updating PCSD_Grantley_Refresh BIOS IDs: 20151030_CP_PCSD_GRANTLEY_REFRESH_11_01_D0068 Rollback ME to 03.01.03.05 Updating PCSD_Grantley_Refresh BIOS IDs: 20151102_CP_PCSD_GRANTLEY_REFRESH_11_01_D0069 Update BIOSID to D0070 Update ucode to 0b00000e for BDW B stepping ================================================================================ R0013 ================================================================================ Rename BIOS ID from D0070 to R0013, no any other code change. ================================================================================ R0014 ================================================================================ EPSD100251243:10% failure was found with wrong system time setting during WCP BDW refresh build. ================================================================================ R1014 ================================================================================ EPSD100030692: [BDW] System would reset during OFU(OFU_V13_Build13_AllOS) updating process with RHEL 7.1.