This release note and the software it accompanies it are copyright (c) 2002, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software.

File name: rh_srcd.gz
Version:   1.11

This download supports the following Intel(R) Server RAID Controllers:
*SRCU31A
*SRCU31LA
*SRCMR
*SRCMRU
*SRCU32 


Attention!
===========
"SRCD" is the remote access service for Intel(R) Storage RAID Controllers.
With 'srcd' running, you can manage Disk Arrays from a remote workstation
by the Intel(R) storage management software (e.g. Storage RAID Console)
via a TCP/IP connection.

This software is intended to be used with all supported revisions of Red Hat Linux

If you configure /etc/srcd.conf, you can send SNMP traps or execute an
external program (e.g. mail) every time a a Disk Array Controller 
event occurs. 

See comments in /etc/srcd.conf for details.


Contents
=========

File		Version		Size		Description
-----		--------	-----		------------
install.sh	n/a		   734		Install Script
srcd		1.11		664000		Remote Access Service
srcd.conf	n/a		  2390		Configuration File
srcdconf.sh	n/a		 13500		Config file script
srctrap.mib	n/a		  4120		Managment Information Base


Using this tool
================
1. Log in as 'root'.
2. Unpack srcd-v.vv-xxxx.tgz (may be srcd-1.09-suse.tgz or srcd-1.09 redhat.tgz):

       tar xvfz srcd-v.vv-xxxx.tgz

3. Run 'install.sh'. It will interactively set up a start script 
   and a file '/etc/srcd.conf':

       ./install.sh
     
4. Edit /etc/srcd.conf, if you want to send SNMP traps or execute an
   external program when controller events occur.
5. Start 'srcd' if not done by 'install.sh':

       SuSE-Linux:   /sbin/init.d/srcd start
       RedHat-Linux: /etc/rc.d/rc2.d/srcd start

6. Enjoy remote management of Intel(R) Storage RAID Controllers.





*Third-party trademarks are the property of their respective owners.