3Com (R) Corporation EtherDisk (R) Diskette for the 3C90x EtherLink 10/100 PCI NIC Family Microsoft Windows 95 with Microsoft's Client for NetWare Networks This file explains how to install the Windows 95 driver to support Microsoft's client for NetWare networks. NOTE: It is assumed that Windows 95 has already been installed on your PC. First-Time Installation ------------------------ The 3Com EtherDisk diskettes 1 and 2 and the Windows 95 installation files are needed during the installation. 1. After installing the NIC as described in the user guide, start your PC. When Windows 95 starts, it detects the NIC, and the following message appears on the screen: Windows has found new hardware and is installing software for it. NOTE: If Windows 95 recognizes the NIC and starts copying files right away without prompting you to insert a diskette, then you have an existing version of the installation. To update your installation and the driver, reboot the PC and then follow the instructions in the Updating Your Driver section below. If Windows does not detect new hardware, the system may have installed a generic PCI Ethernet driver. Refer to the Hints section for details. 2. Select Driver from Disk Provided by Hardware Manufacturer and click OK. 3. Insert the EtherDisk 1 diskette in the A: drive and click OK. 4. Select the NIC that you installed in your computer from the list that appears; then click next. 5. If this is the first time you have installed a NIC on your computer, Windows 95 may ask you to supply the computer name and workgroup name. If your system administrator has supplied you with this information, use it. If not, you can supply your own computer name and workgroup name. 6. Windows now requires files from the Windows 95 installation media. Enter the location of the media. For example, if the Windows 95 CD-ROM is in drive E, type: E:\WIN95 7. Click No if you are asked whether you want to reboot. 8. When you return to the desktop, double-click the My Computer icon, then Control Panel, and then Network. 9. You must now change the Configuration. The default network setup for Windows 95 Consists of the following five components: Client for Microsoft Network Client for NetWare Networks 3Com Fast EtherLink XL 10/100Mb Ethernet NIC IPX/SPX Compatible Protocol NetBEUI Remove these two components by clicking the item and then clicking the Remove button. Client for Microsoft Network NetBEUI The network components should now only include: Client for NetWare Networks 3Com Fast EtherLink XL 10/100Mb Ethernet NIC IPX/SPX Compatible Protocol 10. If any of these components are missing and are required for your network, add them by clicking the Add button. Add protocols by choosing the protocol and clicking the Add button. In the Select Network Protocol window, choose vendor in the left pane, in the right pane, select the protocol and click OK. Add clients by choosing the client and clicking the Add button. In the Select Network Client window, choose Microsoft in the left pane, choose the client in the right pane, and click the OK button. 11. Click Client for NetWare Networks and then the Properties button. 12. Under the General tab, set your Preferred Server and the First Network Drive. When you have finished, click OK. 13. Set the primary network logon to Client for NetWare Networks and click OK. 14. When prompted, restart your computer. Hints ----- 1. If an error message appears, saying that the .INF file cannot be found in the specified location, verify that Windows 95 is looking at the correct location. The file should be in the root directory of the 3Com EtherDisk diskette #1. The filename is W95EL90X.INF. If it is missing, download the file from 3Com's download sites, and make sure you expand it properly. Refer to the SUPPORT.TXT file on this diskette for more information. 2. To verify that the actual NetWare driver was copied to your Windows 95 system, compare the date of the driver .SYS file in the \WINDOWS\SYSTEM directory of your hard drive with the date of the one in the root directory of the 3Com EtherDisk 2 diskette. The dates should be the same. 3. If Windows 95 does not detect new hardware, then the system may have installed a generic PCI Ethernet driver. In this case: a. Double-click on the System icon in the Control Panel. b. Change to the Device Manager tab. c. Under the Network Adapter section, the 3Com driver will be listed with a yellow exclamation in front of it. d. Under the Other Devices section, there will be a PCI Ethernet Controller listed with a question mark in front of it. e. Highlight the PCI Ethernet Controller under Other Devices and click on the Remove button. Select Yes if asked to confirm removal of this device. Select No if asked to restart the computer. f. Highlight the 3Com Fast EtherLink/EtherLink XL driver under Network Adapters and click on the Remove button. Select Yes if asked to confirm removal of this device. Select No if asked to restart the computer. g. Click OK to save all changes. Restart the computer. Updating the Driver -------------------- To update the driver and the support files: 1. Open the Network Control Panel. 2. Click Add. 3. Select Adapter and Click Add. 4. Click Have Disk. 5. Insert the EtherDisk 1 Diskette into the A drive and click OK. 6. Select the NIC you have and click OK. 7. Remove all EtherLink adapters from the control panel by selecting them one at a time and clicking Remove. 8. Click OK 9. When Windows 95 asks the question Do you wish to reboot the system Click YES. 10. Go to step one of the First-Time Installation section, but when Windows 95 starts copying files right away, do not be alarmed, it is copying the updated versions. (%VER W95NETWR.TXT - Windows 95 with Microsoft's Client for NetWare v4.0.3)