********************************************************************* * * * Accton Technology Corporation * * EN1207D Series PCI FAST ETHERNET ADAPTER * * NetWare Client32 Driver Installation Overview * * * * Copyright (C) 1999 by Accton Technology Corporation. * * All rights reserved. * * * ********************************************************************* Contents: A. File Description B. Driver Installation for NetWare Server 3.1x, 4.x, 5.x C. Driver Installation for DOS32 D. Driver Installation for Microsoft Windows 3.x E. Driver Installation for Microsoft Windows 95 F. Parameter Description for ACCODI.LAN A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- CLIENT32.TXT This file. Presents a summary of the contents for NetWare Client32 driver installation. ACCODI.LAN Accton Client32 ODI driver for EN1207D series adapter. This driver complies with NetWare ODI Server driver SPEC 3.31. EN1207D.LDI The (ACCODI.LAN) driver installation information file for NetWare Server 4.X, NeDOS32, Windows 3.x. EN1207D.INF The (ACCODI.LAN) driver installation information file for Microsoft Windows 95. OEMSETNT.INF The (ACCODI.LAN) driver installation information file for Microsoft Windows NT. ------------------------------------------------------------------------------- B. Driver (Spec. 3.31) Installation for NetWare Server 3.1x, 4.x B.1 Driver Installation for NetWare Server 3.12 1. Insert Accton's EN1207D Series Driver Diskette in your PC's floppy drive (A: or B:). 2. Change to the NetWare Server directory (for example: CD\SERVER.312) 3. Copy the following files from the Driver Diskette to the NetWare Server directory. \NetWare\ODI\SERVER\3.12\NBI31X.NLM \NetWare\ODI\SERVER\3.12\MSM31X.NLM \NetWare\ODI\SERVER\ETHERTSM.NLM \LANDRV32\ACCODI.LAN 4. Sample AUTOEXEC.NCF for NetWare Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 B.2 Driver Installation for NetWare Server 4.X 1. Change to the NetWare Server directory (for example: CD\NWSERVER ) 2. Load the NetWare Server System by typing SERVER, then press . 3. When the Server prompt appears, load the NetWare Server Installation Utility. That is, :LOAD INSTALL 4. Select "Driver options" from the "Installtion Options" menu, then press . 5. Select "Configure network drivers" from the "Driver Options" menu, then press . 6. Select "Select a driver" from the "Additional Driver Actions" menu, then press . 7. Press to install a unlisted driver, then press to specify a different path. 8. Insert Accton's EN1207D Series Driver Diskette in your PC's floppy drive and specify the drive path "A:\landrv32" 9. Select "Accton EN1207D Series PCI Fast Ethernet Driver" from the "Select a driver to installed:" menu, then press . 10. If necessary, select "Select/Modify driver parameters and protocols" from the "Board EN1207D_1 (Driver ACCODI) Actions" menu, then press to setup the driver parameters. (Please refer to content G.) Otherwise, select "Save parameters and load driver", then press . 11. Following screen instructions to complete driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 4.X AUTOEXEC.NCF (one board) ======================== LOAD C:MSM LOAD C:ETHERTSM LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 B.3 Driver Installation for NetWare Server 5.X 0. Copy the following files from the Driver Diskette to the NetWare Server directory. \NETWARE\SERVER\4.X\MSM.NLM \NETWARE\SERVER\ETHERTSM.NLM \NETWARE\SERVER\ACCODI.LAN 1. Change to NetWare Server directory (for example: CD\NWSERVER ) 2. Load the NetWare Server System by typing SERVER, then press . 3. When the Server prompt appears, load the NetWare Server Installation Utility. That is, :LOAD NWCONFIG 4. Select "Driver options" from the "Installtion Options" menu, then press . 5. Select "Configure network drivers" from the "Driver Options" menu, then press . 6. Select "Select a driver" from the "Additional Driver Actions" menu, then press . 7. Press to install a unlisted driver, then press to specify a different path. 8. Insert Accton's EN1207D Series Driver Diskette in your PC's floppy drive and specify the path "A:\landrv32". 9. Select "Accton EN1207D-TX PCI Fast Ethernet Driver" from the "Select a driver to install:" menu, then press . 10. If necessary, select "Select/Modify driver parameters and protocols" from the "Board EN1207D_1 (Driver ACCODI) Actions" menu, then press to set up the driver parameters. Otherwise, select "Save parameters and load driver", then press . 11. Follow instructions to complete driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 5.X AUTOEXEC.NCF (one board) ======================== LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 C. Driver Installation for DOS32 1. If you have finished installing the NetWare Client 32 for DOS, all you have to do is modify STARTNET.BAT. Please see the sample STARTNET.BAT beneath these installation instructions. 2. Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare 4.11 CD). When the product manual appears, mark the "NetWare Client 32 for DOS" item, then press . 3. Select the "OTHER DRIVERS" item from the "32-bit Network Board Drivers" menu, then press . 4. Insert Accton's EN1207D Series Driver Diskette into your floppy diskette drive, then specify the driver path, like A:\LANDRV32 or B: 5. Select "Accton EN1207D Series PCI Fast Ethernet Driver", then press . 6. Refer to Content G. and set the correct driver parameters to comply with your network environment, then press to continue. 7. Following screen instructions to complete Client32 for DOS software installation. 8. Reboot your machine. Sample STARTNET.BAT for DOS32. ============================== SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_802.3 LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_II LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM NOTICE!! C:\NOVELL is the directory where your Novell Client 32 files are located. D. Driver Installation for Microsoft Windows 3.x Please refer to Content CD., in step 2, mark "NetWare Client 32 for DOS" and "Client 32 for Windows", then follow step 3...8 to complete installation. E. Driver Installation for Microsoft Windows 95 If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS3 driver for the EN1207D series adapter from the Windows 95 system. E.1 Client 32 Driver Installation on Windows 95 =========================================== 1. Plug Accton's EN1207D series adapter into one of the Master PCI slots of your PCI platform. 2. Turn the power ON, then boot from Windows 95. 3. Windows 95 will prompt with "PCI Ethernet Controller" in the "New Hardware Found" dialog box. 4. Select "Driver from disk provided by hardware manufacturer" from the "New Hardware Found" dialog box, then click the OK button. 5. Insert the Accton EN1207D Series Driver Diskette in your floppy drive. 6. Enter the driver pathname A:\LANDRV32, then click the OK button in the "Install from Disk" dialog box. 7. Follow the screen's prompt to insert the "NetWare Client 32 for Windows 95" disk and click the OK button in the "Insert Disk" dialog box. 8. Otherwise enter the full pathname for the "NetWare Client 32 for Windows 95" installation files in the "Copying Files....." dialog box, then click the OK button. 9. Follow the screen's prompt to insert the "Windows 95 CD-ROM" and click the OK button in the "Insert Disk" dialog box. 10. Otherwise enter the full pathname of the "Windows 95 CD-ROM" installation files in the "Copying Files..." dialog box, then click the OK button. 11. Windows 95 will copy the driver (ACCODI.LAN) from A:\LANDRV32 to the C:\NOVELL\CLIENT32 directory and the EN1207D.INF file from A:\LANDRV32 to the C:\WINDOWS\INF directory. 12. Remove the Accton EN1207D-TX Driver Diskette from your floppy drive. 13. Restart your computer to initialize the network function. NOTICE!! C:\NOVELL is the directory where your Novell Client 32 files are located. C:\WINDOWS is the directory where your Windows 95 O.S. is located. F. Parameter Description for ACCODI.LAN The following parameters are used in ACCODI.LAN. 1. SLOT : specifies which adapter is enabled when multiple EN1207D adapters are found in your computer. The SLOT keyword is an index value corresponding to PCI BIOS. The mapping from SLOT to the physical PCI slot is different from one machine to another. Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2 LOAD ACCODI SLOT=4 FRAME=ETHERNET_II 2. FRAME : specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by loading the same driver with different FRAME types. Ex: LOAD ACCODI FRAME=ETHERNET_802.2 LOAD ACCODI FRAME=ETHERNET_802.3 LOAD ACCODI FRAME=ETHERNET_II LOAD ACCODI FRAME=ETHERNET_SNAP 3. NODE : Uses a different address to replace the node address burned in EEPROM. Ex: LOAD ACCODI NODE=0000E8001122 4. Medium : Specifies which medium type is used by the driver. Accepted vaules are AUTO,100FULL,100HALF,10FULL and 10HALF. Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2 Medium=100FULL --- All trademarks and brand names mentioned belong to their respective owners. -- End of File --