*********************************************************************** * ACCTON TECHNOLOGY CORPORATION * * EN1207D SERIES PCI FAST ETHERNET ADAPTER * * NDIS/2 DRIVER FOR LAN SERVER INSTALLATION * * * * Copyright 1998 ACCTON Technology Corporation * * All rights reserved. * *********************************************************************** The driver named ACCND contained in the directory NDIS conforms to the Network Driver Interface Specification (NDIS) defined by Microsoft/3Com. Contents of the file: A. DOS LAN Requester Installation for LSP V1.30 to V1.37 B. LAN Server 4.0 DOS Client Installation C. OS/2 LAN Server 3.0 Installation D. OS/2 LAN Server 4.0 Installation E. OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters) A. DOS LAN Requester Installation for LSP V1.30 to V1.37 ========================================================= 1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31 to 1.37) Diskette into your floppy drive (drive A: or B:). 2. Type the following at the DOS prompt and press : A:>dxmaid 3. The screen will display the IBM logo. Press twice until the "Environment Information" appears on screen. 4. Respond to the screen prompts, specifying the following values for each field: Use the to toggle between choices: Configuration for this computer? Yes Use existing configuration information? Yes Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Do you need 802.2 interface support? No Enter the appropriate drive and directory information: Source for LSP A:\ Target for new configuration C:\lsp 5. Make sure that the values given above are correct. Press to store your choices. 6. Insert the Driver Diskette in your source drive. Specify the path and press to proceed. Examples: A:\NDIS\DOS, B:\NDIS\DOS 7. Upon pressing the necessary drives from the Driver Diskette are copied onto you target directory on your hard disk. 8. Follow the screen instructions to complete this process. Simply press for each screen display to select the default options. Press three times, until you reach the display prompting you to insert the LSP diskette. 9. Insert the LSP diskette as prompted. Press to acknowledge completion of the action. 10. A screen showing the current configuration detected will be displayed. It should show the Accton EN1207D Series PCI Fast Ethernet adapter and the protocols already selected (i.e., "IBM IEEE 802.2" and "IBM OS/2 NETBIOS"). 11. Press to save the new configuration. This completes the LSP installation. ************************************************************ * NOTE: * * * * You should have defined in your CONFIG.SYS a * * minimum of 20 files, i.e. FILES=20, to run the * * software properly. Change the FILES line using * * the text editor if needed. * * * * If installing LSP for the first time, you should * * complete the installation by typing install and * * following the instructions displayed on the screen. * ************************************************************ 12. Use a text editor to edit the CONFIG.SYS file. Specify at least 20 files in the FILES= line. Modify it to the following: FILES=20 13. Save the configuration and reset your computer. 14. Insert the DOS LAN Requester Install Diskette into your floppy drive. 15. Type the following and press : INSTALL 16. The IBM logo will again appear on the screen. Press to move on to the next screen. 17. Follow screen instructions, pressing to move from screen to screen until you are prompted to indicate the pathname of the DOS LAN Requester directory. TIP: After the IBM logo appears on the screen, press twice to reach this screen. 18. Specify the pathname for the DOS LAN Requester directory (C:\DOSLAN is the default). Then press to continue. 19. The program will ask you for the services that you require. 20. Highlight the appropriate option. Select either "Send messages" or the "Send, View, Edit, and Log message" option. TIP: Normally, the second option "Send, View, Edit and Log message" is selected. 21. Specify the PC's ID and domain ID. The domain ID is the domain server ID; it should be the same for all workstations of the network. 22. Follow the screen prompts to complete installation. B. LAN Server 4.0 DOS Client Installation ========================================== 1. Under the DOS environment, change to the LAN Server DOS Client subdirectory, that is, enter the following command CD \NET Note: \NET is the default directory name of LAN Server 4.0 DOS Client. Note: Before installing the LAN driver, you should install the IBM LAN Server DOS Client first. 2. Type INSTALL and press to enter the DOS LAN installation program. 3. When the "Install for DOS LAN Services" screen appears, highlight the "the listed options are correct" choice and press . 4. On the second screen, you will see the following information: Machine ID, User name, Domain name,... and Network card information. Highlight the "Network card : No network card was selected" choice and press . 5. Select the first choice from the following two selections "Add driver for network card", "Driver configuration is correct". 6. Select "Network card not shown in list below ..." from a listing of network adapters on the next screen. 7. Insert the Accton EN1207D Series driver diskette into drive A: and specify the path of the driver installation file (OEMSETUP.INF) by typing A:\NDIS\DOS and press . 8. Highlight "Accton EN1207D Series PCI Fast Ethernet Adapter" and press . 9. If necessary, choose "Edit settings for network card driver", otherwise choose "Driver configuration is correct". Note: Please see NDIS.TXT for the parameter settings. 10. Highlight "The listed options are correct" and press on the next screen. 11. Then, the Installation Program will ask you to insert DOS LAN Services Disk 1. Be careful, do not follow the screen instruction here; that is, you should not insert the DOS LAN Services Disk. All you have to do is press and wait for installation complete. 12. Remove the diskette from drive A: and press to restart the machine. C. OS/2 LAN Server 3.0 Installation ==================================== 1. Copy ACCND.OS2 and ACCND.NIF files from your Driver diskette (A:\NDIS\OS2) to C:\IBMCOM\MACS. 2. Click the OS/2 LAN Service icon. 3. Select "Installation and configuration." The IBM logo should appear on screen. 4. Click . 5. Select and press . 6. Select "Install or Configure this Workstation." 7. Select server type, adding a server or domain controller. The "install or remove" selections should appear. 8. Select "Configure a component." 9. Click the "Configure" button. 10. Select "Configure workstation." 11. Select "Accton EN1207D Series PCI Fast Ethernet Adapter" when prompted to identify you Network Adapter, then click the button. 12. Select "802.2" from the list and click the button. 13. Select IBM NETBIOS from the list and click the button. 14. Select to confirm all selections. 15. Follow screen instructions to complete the process, selecting to accept default selections. 16. Continue pressing until your screen prompts you to backup the old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT. Also select to confirm this. 17. Installation is complete now. Reset your PC by turning it off and on. D. OS/2 LAN Server 4.0 Installation ==================================== 1. In the OS/2 desktop, click the MPTS (Multi-Protocol Transport Service) icon. The IBM logo should appear on screen. 2. Click the button. 3. Click the button. 4. Select the "LAN adapters and protocols" item, then click the button. 5. Click the button. 6. Insert the Accton EN1207D Series PCI Fast Ethernet Adapter Driver Diskette into drive (A: or B:), then enter the driver path like A:\NDIS\OS2, (or B:\NDIS\OS2, etc.) and click the button 7. Select "Accton EN1207D Series PCI Fast Ethernet Adapter" from the Network Adapters list when prompted to identify you Network Adapter. Then click the button. 8. Select "IBM 802.2" from the Protocols list and click the button. 9. Select "IBM OS2 NETBIOS" from the Protocols list and click the button 10. Select "IBM NetWare Requester Support" from the Protocols list and click the button if you need to log onto a NetWare server. 11. Select to confirm all selections. 12. Click the button in the Configure window. 13. Click the button in the MPTS window. 14. Click the button, then your screen will prompt you to backup the old CONFIG.SYS and AUTOEXEC.BAT and create a new CONFIG.SYS and AUTOEXEC.BAT. Select to confirm this. 15. Installation is complete now. Reset your PC by turning it off and on. E. OS/2 LAN Server 4.0 Installation (Multiple LAN Adapters) ============================================================ For multiple adapters installation, you must do the following: a. configure b. configure a. Configure ------------------------------ 1. From the OS/2 desktop, click 2. In the LAN Services windows, click 3. Click when the IBM logo appears. 4. In the "Basic or Advanced Installation/Configuration" dialog box, click 5. Select "Install or configure this workstation" in the "Installation Tasks" dialog box, and click 6. Select Server Type (like, Domain controller) then click 7. Select "Configure a component" from the "Installation and Configuration" dialog box, and click 8. Select "LAN Services Adapters" from the "Configure" dialog box, and click 9. Select the LAN adapters to be used by LAN Services (for 2 adapters, select Adapter 0, Adapter 1) and click 10.Assign the NETBIOS Resources like Sessions, Commands & Names (you can use the default value) and click for the different adapters. 11.Click in the "Configure" dialog box. 12.Select "Apply the changes" and click in the "Installation and Configuration" dialog box. 13.Follow screen instructions to complete installation. 14.Shut down and reboot the machine. b. Configure ---------------------------------- If you have more than one adapter, you need to configure each of them for different Slots by clicking in "Configure" windows. ******************************************************************** * NOTE!! * * * * Each slot represents a PCI adapter index value for one * * installed adapter (EN1207D in this case) * * assigned by the PCI BIOS. For example, if the 1st slot is * * assigned slot=1, then the next slot will be assigned * * slot=2, the third slot=3, and so forth until the last slot * * * ******************************************************************** ------------------------------------------------------ All trademarks or brand names mentioned are properties of their respective companies. ===End of File===