*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*            EN1207D SERIES PCI FAST ETHERNET ADAPTER             *
*                 NETWARE ODI DRIVER INSTALLATION                 *
*                                                                 *
*         Copyright (C) 1998 Accton Technology Corporation        *
*                       All Rights Reserved.                      *
*******************************************************************


Content of this document
========================
        A. DOS ODI WorkStation Driver Installation
        B. Installation Notes


A. NetWare DOS ODI Workstation Driver Installation
==================================================
This section describes the procedure to install
the NetWare workstation driver for your adapter.

Requirements:
-------------
      Accton EN1207D Series Driver Diskette  (ACCODI.COM)
      Driver Location: \NETWARE\DOSODI

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NetWare operating system is properly installed.

1. Run the following command in the order given below and
   press <Enter>:

   lsl
   accodi
   ipxodi
   netx (or vlm)

2. You can now log onto your network.


B. Installation Notes
=====================

1. Edit the NET.CFG if you want to change some parameters.

   For example, if you're using a NetWare 3.11 workstation and
   want to log into a NetWare v4.X  server. The default
   frame type of NetWare 3.11 is Ethernet 802.3, while that of
   NetWare v4.X is Ethernet 802.2. Before you can log into
   NetWare v4.X , make sure there is a protocol binding
   for Ethernet 802.3 in the server's NET.CFG file.

   This is normally included in the [MLID] section. A sample
   NET.CFG file is given below:

   Link Driver ACCODI
        FRAME Ethernet_802.2
        FRAME Ethernet_802.3
        FRAME Ethernet_II
        FRAME Ethernet_SNAP
        PROTOCOL IPX 0    Ethernet_802.3
           .
           .
        MEDIUM  AUTO     ;operate on auto negotiation mode
     ;  MEDIUM  10HALF   ;operate on 10M/HalfDuplex mode
     ;  MEDIUM  10FULL   ;operate on 10M/Fullduplex mode
     ;  MEDIUM  100HALF  ;operate on 100M/HalfDuplex mode
     ;  MEDIUM  100FULL  ;operate on 100M/Fullduplex mode

---
All trademarks and brand names mentioned belong to their
respective owners.


-- THE END --