******************************************************************* * ACCTON TECHNOLOGY CORPORATION * * EN1207D Series PCI FAST ETHERNET ADAPTER * * WINDOWS NT NDIS3/4 MINIPORT DRIVER INSTALLATION * * AND * * UNATTENDED INSTALL * * * * Copyright (C) 1999 Accton Technology Corporation * * All Rights Reserved. * ******************************************************************* The driver (ACC07D.SYS) contained in the directory WINNT is for the following Accton PCI Ethernet adapter: Accton EN1207D Series PCI Fast Ethernet Adapter The driver (ACC07D.SYS) conforms to the Network Driver Interface Specification (NDIS) 4.0, and is used with Microsoft Windows NT 4.0 on the X86 platform. NDIS 4.0 Minport Driver does not support the Microsoft Windows NT 3.51 platform; NT 3.51 must use the NDIS 3 Minport Driver. Contents: --------- (A) Installing the driver in Microsoft Windows NT 3.51 (B) Installing the driver in Microsoft Windows NT 4.0 (C) Unattended install in Windows NT 4.0 using EN1207D PCI Adapter File Description ================ ACC07D.SYS Accton NDIS4 Miniport driver for EN1207D. OEMSETUP.INF Installation information file for Windows NT 3.51 and NT 4.0. WINNT.TXT This file. UNATTEND.TXT Script file for Unattended install. \NT351 ACC07D.SYS Accton NDIS3 Miniport driver for EN1207D Series adapter. (A) Installing the driver in Microsoft Windows NT 3.51 ================================================== 1. Plug Accton's EN1207D series adapter into one of the Master PCI slots of your PCI platform. 2. Turn the power ON and then boot into Windows NT. 3. Click the "Main" icon in the Program Manager window. 4. Click the "Control Panel" icon in the Main window. 5. Click the "Network" icon in the the Control Panel window. 6. Click the "Add Adapter..." button in the "Network Settings" dialog box. 7. Select " Requires disk from manufacturer" in Network Adapter Card list, and then click the "Continue" button in the "Add Network Adapter" dialog box, 8. Insert the Accton EN1207D Series Driver Diskette in your floppy drive. 9. Enter the full pathname A:\WINNT of the driver installation information file (OEMSETUP.INF) in the "Insert Disk" dialog box, and then click the OK button. 10. Select "Accton EN1207D Series PCI Fast Ethernet Adapter" and then click the OK button in the "Select OEM Option" dialog box. 11. Select the Line Speed value (AUTO,100full,100half,10full, 10half) and then click the OK button in the "Select Line Speed" dialog box. 12. Windows NT will copy the driver (ACC07D.SYS) from A:\WINNT\NT351 (NDIS/3)to C:\WINNT\SYSTEM32\DRIVERS directory and the OEMSETUP.INF from A:\WINNT to C:\WINNT\SYSTEM32 but rename it to another installation information file (OEMNADxx.INF). So the next time, if you want to add Accton EN1207D series adapters to your system, you do not need the floppy diskette again. NOTICE!! C:\WINNT is the directory where your NT O.S. is located. 13. After that, installation is completed. Accton's adapter becomes one of those Installed Adapter Cards and the driver becomes one of the Installed Network Software. You can see: "[x]Accton EN1207D Series PCI Fast Ethernet Adapter" within Installed Adapter Cards menu and "Accton EN1207D Series PCI Fast Ethernet Driver" within Installed Network Software menu. 14. To complete network installation, remember to bind the adapter to the transport drivers by choosing the "Bindings" button under the Network Setting dialog box. 15. Click the OK button in the "Network Settings" dialog box. 16. Remove the Accton EN1207D Series Driver Diskette from your floppy drive. 17. Restart your computer to initialize the network function. (B) Installing the driver in Microsoft Windows NT 4.0 ================================================= 1. Plug Accton's EN1207D series adapter into one of the Master PCI slots of your PCI platform. 2. Turn the power ON and then boot into Windows NT. 3. Click the "My Computer" icon in the Main Program Group. 4. Click the "Control Panel" icon in the Main window. 5. Click the "Network" icon in the Control Panel window. 6. Select the "Adapters" item, and then click the "Add..." button in the "Network" dialog box. 7. Select " Requires disk from manufacturer" from the Network Adapter Card list, and then click the "Continue" button in the "Add Network Adapter" dialog box, 8. Insert the Accton EN1207D series Driver Diskette in your floppy drive. 9. Click the "Have Disk..." button in the "Select Network Adapter" dialog box. 10. Enter the full pathname A:\WINNT of the driver installation information file (OEMSETUP.INF) in the "Insert Disk" dialog box, and then click the OK button. 11. Select "Accton EN1207D series PCI Fast Ethernet Adapter" and then click the OK button in the "Select OEM Option" dialog box. 12. Select the Line Speed value (AUTO,10ofull,100half,10full, 10half) and then click the OK button in the "Select Line Speed" dialog box. 13. Windows NT will copy the driver (ACC07D.SYS) from A:\WINNT to C:\WINNT\SYSTEM32\DRIVERS directory and the OEMSETUP.INF from A:\WINNT to C:\WINNT\SYSTEM32 but rename it to another installation information file (OEMNADxx.INF). So the next time, if you want to add Accton EN1207D series adapters to your system, you do not need the floppy diskette again. NOTICE!! C:\WINNT is the directory where your NT O.S. is located. 14. After that, installation is completed. You can see: "[x]Accton EN1207D series PCI Fast Ethernet Adapter" in Network Adapters list in the "Network" dialog box. 15. To complete network installation, remember to bind the adapter to the transport drivers by choosing the "Bindings" button in the "Network" dialog box. 16. Click the "Close" button in the "Network" dialog box. 17. Remove the Accton EN1207D Series Driver Diskette from your floppy drive. 18. Restart your computer to initialize the network function. (C) Unattended install in Windows NT 4.0 using EN1207D PCI Adapter ================================================================== Overview The purpose of this file is to allow for manual installation of Windows NT4.0 Workstation or Server with Accton EN1207D series PCI Adapters. Supported Adapters: 1.Accton EN1207D Series PCI 10/100 Ethernet Adapter 2.Integrated 10/100 Ethernet Adapter This software distribution has unattended files and sample scripts for WindowsNT 4.0 Workstation and Server. The sample Unattended script is: WindowsNT 4.0 Workstation/Server = /UNATTEND.TXT The WindowsNT 4.0 Workstation/Server script has been designed to install NT with the following options: (your site could have different requirements) · FileSystem ===> FAT · Workgroup ===> WORKGROUP, ie not into a DOMAIN · NT root directory ===> \WINNT40 · Networking protocols used ===> NetBEUI, IPX · Networking protocols used ===> NetBEUI, IPX Note : For best results with multiple machines it is recommended that you use this file in conjunction with an UDF file to customize options such "ComputerName" and "FullName". Installation Steps: 1) Extract the compressed file. 2) Create a new subdirectory structure on your Network Installation Server within the WindowsNT distribution share point. The new directory structure is shown in the example below: EXAMPLE: F:\WINNT\i386 - Distribution Share Point on Server ADD: \$OEM$\NET\ACCTON - Directory Structure The directory structure once completed should look like this: EXAMPLE: F:\WINNT\I386\$OEM$\NET\ACCTON 3) Modify "UNATTEND.TXT" file. Select Network Adapter type In "[SelectedAdaptersSection]" section. EXAMPLE: 1. For "Accton EN1207D Series PCI Ethernet Adapter" [SelectedAdaptersSection] EN1207D = OEMAdapterParamSection, \$OEM$\NET\ACCTON 2. For "Integrated 10/100 Ethernet Adapter" [SelectedAdaptersSection] EN1207DI = OEMAdapterParamSection, \$OEM$\NET\ACCTON 4) Copy the Accton Drivers into the new ACCTON subdirectory: EXAMPLE: UNATTEND.TXT ACC07D.HLP ACC07D.SYS OEMSETUP.INF 4) If you are using your own Unattend.txt file please take note of the sections below. Please add these sections to your existing script file: [Unattended] OemPreinstall = yes [Network] InstallAdapters = SelectedAdaptersSection [SelectedAdaptersSection] EN1207D = OEMAdapterParamSection, \$OEM$\NET\ACCTON or [SelectedAdaptersSection] EN1207DI = OEMAdapterParamSection, \$OEM$\NET\ACCTON [OEMAdapterParamSection] Command line execution Start NT installation with the following command line {source}\winnt.exe /B /S:{source} /U:{source}\$OEM$\NET\ACCTON\UNATTEND.TXT. Where {source} is the source drive and source directory on the distribution software server. In this example the share point directory is called F:\WINNT\I386. This Example assumes that it is executed from within the I386 Directory. EXAMPLE: WINNT /B /S:F:\WINNT\I386 /U:F:\WINNT\I386\$OEM$\NET\ACCTON\UNATTEND.TXT For further information on using attended installation with Microsoft Windows NT Workstation or Server see the Windows NT Resource Kit or contact Microsoft Corporation. Trademarks: Microsoft Windows NT is a trademark of Microsoft Corporation. --End of File--