ASSETMGT.EXE 71k 10/3/94 The Assetmgt.exe is run after a system board has been swapped. The Image P90 system boards stores the following information in NVRAM: - System Model # - System Serial # - System Board revsion # The Assetmgt.exe program allows the user to put this information back in after a new system board is installed. For more information on this utility, see page 4-7 of the Image P90 Service & Reference Guide. ATAPI.SYS 27k 2/22/95 atapi driver ver 1.2 for the CMD chipset AUXWIN-A.EXE 694k 9/2/92 AUXWIN-A.EXE This is a self-extracting archive containing the video drivers for NEC systems with Tseng Labs video circuits for use with Windows 3.1 The diskette label should read as follows: Auxiliary Windows Drivers Diskette (A) Version 1.03.01 Copyright (C) Tseng Labs Inc. 1992; NEC Corporation 1991 AUXWIN-A.EXE will create either a 3.5" or a 5.25" diskette by typing: AUXWIN-A d: where d: represents your A: or B: diskette drive. Applicable systems are: PowerMate SX/20i / PowerMate SX/25i / PowerMate SX/20c / PowerMate 386/3;P PowerMate 486SX/25i / PowerMate 486/33i / PowerMate 486/50i PowerMate Express systems EXCEPT those with the NEC Express VGA Adapter AUXWIN-B.EXE 705k 6/23/92 AUXWIN-B.EXE This is a self-extracting archive containing the video drivers for NEC Express systems with NEC/S3 BitBlt video circuits for use with Windows 3.1 The diskette label should read as follows: Auxiliary Windows Driver Diskette (B) Version 1.01.00 Copyright (C) S3 Inc. 1992; NEC Corporation 1992 AUXWIN-B.EXE will create either a 3.5" or a 5.25" diskette by typing: AUXWIN-B d: where d: represents your A: or B: diskette drive. Applicable systems are: PowerMate Express systems with the NEC BitBlt Video Adapter AUXWIN-C.EXE 393k 6/23/92 AUXWIN-C.EXE This is a self-extracting archive containing the video drivers for NEC systems with Western Digital video circuits for use with Windows 3.1 The diskette label should read: Auxiliary Windows Driver Diskette (C) Version 1.01.00 Copyright (C) Western Digital Corp. 1992; NEC Corporation 1991 AUXWIN-C.EXE will create either a 3.5" or a 5.25" diskette by typing: AUXWIN-C d: where d: represents your A: or B: diskette drive. Applicable systems are:PowerMate SX/16i / PowerMate SX/20vi ProSpeed 486SX / Prospeed 486SX/C CLRCMOS.EXE 14k 5/19/95 To clear CMOS on PowerMate and Image systems. See RM10000.TXT for instructions. D22000S3.EXE 339k 2/3/93 This is the Hardware Setup Utility disk for Image 486 systems. D22004B3.EXE 231k 5/14/93 This is the BIOS Update Diskette for the NEC Image 486 series systems. The BUD is version 1.18.17 and the BIOS is version 1.00.36 This file creates a 3.5" (1.44MB) bootable diskette Applicable Systems: NEC Image 425 NEC Image 433 NEC Image 466 D22004B5.EXE 201k 5/14/93 This is the BIOS Update Diskette for the NEC D22007B3.EXE 232k 9/14/93 This is the BIOS Update Diskette for the NEC Image 486 systems (A6KV) The BUD is version 1.18.24 and the BIOS is version 1.00.40 This file creates a 3.5" (1.44MB) bootable diskette Applicable Systems: NEC Image 425 NEC Image 433 NEC Image 466 D22007B5.EXE 201k 9/14/93 This is the BIOS Update Diskette for the NEC Image 486 systems (A6KV) The BUD is version 1.18.24 and the BIOS is version 1.00.40 This file creates a 5.25" (1.2MB) bootable diskette Applicable Systems: NEC Image 425 NEC Image 433 D22008B3.EXE 256k 6/8/95 BIOS Update Image 425/433/466 (A6KV) v1.00.42 3.5" D22009B3.EXE 263k 6/8/95 BIOS Update Image 425/433/466 (A6KV) v1.00.43 3.5" D2200V.EXE 329k 4/16/93 This is the video drivers diskette for NEC Image systems with the Tseng ET4000/W32 follows: Video Drivers Diskette for NEC Image Systems with Tseng ET4000/W32 Video Ver. 1.01.00 1/29/93 This program will create either a 5.25" or a 3.5" diskette by typing: D2200V d: where d: represents a pre-formatted diskette in your A: or B: drive Drivers included: AutoCAD, Gem, Lotus, WordPerfect and Vesa Windows drivers are available in the file D2200W.EXE Applicable Systems: NEC Image 425/433/466 D2200W.EXE 1,122k 5/5/93 This is a self-extracting archive containg the video drivers for NEC Image systems with Tseng ET4000/W32 video circuits for use with Windows 3.1 The diskette label should read as follows: Auxiliary Windows 3.1 Drivers Diskette for NEC Image systems with Tseng ET4000/W32 Version 1.03.00 4/22/93 D2200W.EXE will create either a 3.5" or a 5.25" diskette by typing: D2200W d: where d: represents a pre-formatted diskette insufficient room on a 1.2MB diskette for all files Applicable systems are: NEC Image 425/433/466 D22400S3.EXE 822k 3/31/94 HW Setup disk for Image P60 (A10I) v1.00.07 3.5" D22400S3.EXE 822k 3/31/94 HW Setup disk for Image P60 (A10I) v1.00.07 3.5" D22404B3.EXE 304k 10/3/94 BIOS update for the Image P60 Version 1.00.27 D2240BCU.EXE 184k 11/29/93 BIOS Customization Utility for NEC Image P60 (A10I) 3.5" D2240W3.EXE 651k 3/31/94 Windows video drivers Image P60 (A10I) with Viper PCI Utils D22601S3.EXE 1,152k 2/15/94 HW Setup disk Image 486es Series (IM3) v1.10.00 3.5" D22604B3.EXE 241k 2/15/94 BIOS Update Image 486es Series (IM3) v1.01.01 3.5" D22607B3.EXE 252k 9/16/94 BIOS Update Image 486es Series (IM3) v1.01.12 3.5" D22608B3.EXE 251k 5/19/94 BIOS Update Image 486es series (IM3) v1.01.07 D2260W3.EXE 827k 9/20/93 This is a self-extracting archive containg the video drivers for NEC Image 486es systems for use with Windows 3.1 This file will create a 3.5" diskette D23001W3.EXE 1,353k 1/30/95 Image P90 Auxilliary Windows Drivers for the Tseng W32p D23005B3.EXE 596k 8/1/95 This BIOS 1.00.07 corrects problems of BIOS upgrade failures when an ISA VGA card is installed. D2300AU3.EXE 1,277k 3/6/95 Logitech SoundMan drivers disk#1 - Image P90 & Image P90D multimedia D2300BU3.EXE 1,342k 3/6/95 Logitech SoundMan drivers Disk#2 - Image P90 & Image P90D multimedia D2300SRD.EXE 191k 9/27/94 System Recovery disk for Image P90 (IM4) D2300W.EXE 734k 9/27/94 Windows & DOS Video Drivers for Image P90 (IM4) v1.00.02 D2310AS3.EXE 684k 3/2/95 EISA Configuration Utility for Image P90E/P100E, ver 1.00.00 D2310BB3.EXE 552k 4/12/95 BIOS Update diskette for Image P90E/P100E (A105) ver. 1.00.05 D2310CB3.EXE 368k 5/12/95 This BIOS Update fixes Windows NT 3.51 installation problems. D2310W3.EXE 860k 3/2/95 Auxilliary Windows Driver Diskette for Image P90E/P100E, ver.1.00.01 D23503B3.EXE 732k 5/19/95 This bios update incorporates Tseng Video Bios V941104 w/DDC2 support. Resolves problems with video and some Token Ring cards. D5301B3.EXE 209k 8/13/92 This is the BIOS Update Utility for the NEC PowerMate Image 386/33i The BUD version is 1.08.14 and the BIOS version is 1.03.16 This program creates a bootable 3.5" (1.44MB) diskette NOTE: This file does NOT replace PM530B14.EXE as it is a support release only D5301B5.EXE 178k 8/13/92 This is the BIOS Update Utility for NEC The BUD version is 1.08.14 and the BIOS version is 1.03.16 This program creates a bootable 5.25" (1.2MB) diskette NOTE: This file does NOT replace PM530B12.EXE as it is a support release only D6603B3.EXE 208k 12/3/92 This is the BIOS Update utility for NEC PowerMate 486i systems The BUD version is 1.12.20 and the BIOS version is 1.02.18 This file does NOT replace PM660B14.EXE as it is a support release only This program creates a bootable 3.5" (1.44MB) diskette Applicable Systems: PowerMate 486SX/25i PowerMate 486/33i PowerMate 486/50i D6603B5.EXE 177k 12/3/92 This is the BIOS Update utility for NEC PowerMate 486i systems, same as above, but for a 5.25 diskette. D8400B3.EXE 208k 10/16/92 This is the BIOS Update Diskette for the NEC PowerMate SX/20i, 3.5 floppy NOTE: This file replaces PM840B14.EXE D8400B5.EXE 177k 10/16/92 This is the BIOS Update diskette for the NEC PowerMate SX/20i, 5.25 floppy D8800B3.EXE 216k 11/4/92 This is the BIOS Update Diskette for the NEC PowerMate SX/25i The BUD version is 1.14.06 and the BIOS D8800B5.EXE 186k 11/4/92 This is the BIOS Update Diskette for the NEC PowerMate SX/25i The BUD version is 1.14.06 and the BIOS version is 1.00.06 This program will create a bootable 5.25" (1.2MB) diskette Applicable Systems: All NEC PowerMate Image SX/25i systems version is 1.00.06, for 3.5 floppy. D8800S3.EXE 308k 11/18/92 This is the Hardware Setup / Utilities diskette for the NEC PowerMate SX/25i version 2.02.00 This program creates a bootable 3.5", 1.44MB diskette Applicable Systems are: All NEC PowerMate Image SX/25i systems DVVID302.EXE 1,313k 3/22/94 DOS and Windows video drivers for NEC systems with optional Diamond Viper Video card. Applicable Systems: NEC Image P60 series (A10I) NEC Express/II P601LT (A96) ETHEXP.EXE 549k 3/10/94 EtherExpress drivers for NEC Image 486es systems EZSCSI31.EXE 1,429k 8/9/94 EZSCSI for DOS/Windows on Express/II LT, ver. 3.01L FLOPSYS1.EXE 79k 2/22/94 FLOPPY.SYS Fix file for WindowsNT on Image 486es systems HS5302.EXE 286k 10/29/93 Hardware Setup v 2.10.00 for 386/33i HSEL4863.EXE 390k 7/6/92 Hardware Setup Util v2.04.02 for PM486i series 3.5" Diskimg HSEL4865.EXE 385k 7/16/93 Hardware Setup Utilities v2.04.02 for PM486i series 5.25" IMG2-OS2.EXE 63k 3/17/93 This disk contains the OS/2 2.0 correction files for Tseng W32 video in NEC Image systems. NOTE: This patch must be installed AFTER the IBM Service Pack for OS/2 2.0 has been installed. This program will create a 5.25" (1.2MB) or a 3.5" (1.44MB) diskette. IMSCRSAV.SCR 152k 11/3/93 Image III Power Management Screen Saver - IMSCRSAV.SCR Version 1.00.04 NECNEXT.TXT 3k 1/25/94 Installation instructions for Image/NextSTEP 3.2 files. NECSCSI.TAZ 129k 1/24/94 The file necscsi.taz is a driver for the NEC Image 486es PC on board Adaptec 6360 SCSI controller. First rename the file to necscsi.compressed, then double click on the icon and it will decompress to necscsi. Rename this file to AIC6X60.config. To install it you must be logged in as root. Copy the file to a floppy formatted as a NeXT file system. Put the file AIC6X60.config into a sub directory entitled /usr/Devices. Now you can install on NS 3.2. When the NeXTSTEP 3.2 install floppy asks you for other device driver floppy, insert this one. NECW32I.TAZ 111k 1/24/94 The file necw32i.taz is a driver for the NEC Image 486es PC on board Tseng ET4000W32i video controller. First rename the file to necw32i.compressed, then double click on the icon and it will decompress to necw32i. Rename this file to ET4000W32i.config. To install it you must be logged in as root but the driver can be installed from the root directory. Launch the configure.app, click on Display, and remove the Default Video driver. Click on ADD, click on Install Driver, put the floppy in Drive A:. Click on ET4000W32i.config, and NS will install the driver, then select the resolution you PM830B12.EXE 177k 8/4/92 PM SX/16I;BIOS:1.08.13; Makes a 1.2 floppy disk PM830B14.EXE 179k 8/4/92 PM SX/16I.BIOS:1.08.13.Makes a 1.44 floppy disk PM860B12.EXE 250k 1/31/92 PMSX/20c:BIOS:1.04.15. Makes a 1.2 floppy disk PM860B14.EXE 251k 1/31/92 PMSX/20c:BUU:Ver1.11.00.BIOS1.04.15.Makes a 1.44 floppy disk PM870B12.EXE 178k 8/4/92 SX20VI:BIOS:1.10.07.Makes a 1.2 fd;WIN3.1/EMM386 PM870B14.EXE 180k 7/7/95 SX20VI:BIOS1.10.07; Makes a 1.44 fWIN3.1/EMM386 POWSAV03.EXE 6k 11/3/93 Image 4xxes Powersave utility version 1.00.03 TSVID114.EXE 270k 6/10/92 This is the new video drivers diskette for NEC systems with Tseng video chips. The diskette label should read as follows: VPRPCI1.EXE 1,382k 5/4/94 Also an updated version of VPRMODE.EXE VPRPCI2.EXE 623k 5/4/94 Viper Video Drivers for Windows 3.1, NT and OS2 2.1 VPRPCI3.EXE 358k 5/4/94 Viper Video Drivers for Windows 3.1, NT and OS2 2.1